3D|printed polycaprolactone scaffolds coated with beta tricalcium ...

Three-dimensionally printed polycaprolactone and β-tricalcium ...

Article: Three-dimensionally printed polycaprolactone and β-tricalcium phosphate scaffolds for bone tissue engineering: an in vitro study.

Application of 3D-printed Polycaprolactone Scaffolds for both Bone ...

The purposes of this study were as follows: 1) to investigate the mesh-structured 3D-printed PCL scaffolds coated with beta-tricalcium phosphate for bone tissue ...

Effects of three-dimensionally printed polycaprolactone/β-tricalcium ...

3D printed PCL/β-TCP scaffold with a bone differentiation medium. Alkaline ... Biomimetic composite coating on rapid prototyped scaffolds for bone ...

In Vitro Alendronate Release Behavior and Local Delivery Effect on ...

Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and ...

Fabrication of Polylactic Acid/β-Tricalcium Phosphate FDM 3D ...

The Influence of Cellular Source on Periodontal Regeneration Using Calcium Phosphate Coated Polycaprolactone Scaffold Supported Cell Sheets. ... 3D-Printed ...

Biological Evaluation of 3D-Printed Polycaprolactone/β-Tricalcium ...

Methods: 3D printing of pure PCL and PCL-β-TCP scaffolds (30 and 60 % wt TCP) was carried out. The biological properties of the scaffolds were evaluated using ...

Use of 3D-printed polycaprolactone + hyaluronic acid-based ...

Three-dimensionally printed polycaprolactone/beta-tricalcium phosphate scaffold ... Evaluation of 3D-printed polycaprolactone scaffolds coated ...

Beta-tricalcium phosphate scaffolds | Sigma-Aldrich

... Printed Polycaprolactone/Beta-Tricalcium Phosphate Scaffolds for Bone Tissue Engineering. ... scaffolds coated with beta ... SrO- and MgO-doped ...

Biomimetic Mineralized 3D-Printed Polycaprolactone Scaffold ...

... 3D-printed polycaprolactone (PCL) scaffolds. ... 3D-printed polycaprolactone scaffolds coated with beta tricalcium phosphate for bone regeneration.

3D printing of PCL-ceramic composite scaffolds for bone tissue ...

... calcium and magnesium that are favorable for bone cells to grow. These 3D-printed scaffolds thus provide a desirable microenvironment to facilitate ...

Systematic characterization of 3D-printed PCL/β-TCP scaffolds for ...

Regarding material composition, medical grade poly(ε-caprolactone) (PCL) and beta tricalcium phosphate (β-TCP) are two widely used materials for ...

Polycaprolactone strengthening gelatin/nano-hydroxyapatite ...

Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds ... Continuously released Zn2+ in 3D-printed PLGA/β-TCP/Zn scaffolds for ...

In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold ...

After fabricating 3D PCL scaffolds using rapid prototyping, the scaffolds were implanted into the alveolar bone defects along with β-tricalcium phosphate powder ...

Bioactive calcium silicate/poly-ε-caprolactone composite scaffolds ...

Enhanced osteogenic differentiation of stem cells by 3D printed PCL scaffolds coated with collagen and hydroxyapatite. Article Open access 20 ...

3D printed titanium carbide MXene-coated polycaprolactone ...

We fabricate bioactive interfaces by melt electrospinning writing (MEW) 3D polycaprolactone (PCL) scaffolds followed by coating with titanium carbide (Ti 3 C 2 ...

Polydopamine-coated 3D-printed β-tricalcium phosphate scaffolds ...

3D-printed β-TCP scaffolds with a PDA coating can improve the physicochemical characteristics and cellular bioactivity of the scaffold surface for bone ...

Osteogenesis of adipose-derived stem cells on polycaprolactone-β ...

The current study aimed to fabricate three-dimensional (3D) polycaprolactone (PCL), polycaprolactone and β-tricalcium phosphate (PCL-TCP) scaffolds via a ...

Osteogenesis of adipose-derived stem cells on polycaprolactone-β ...

Osteogenesis of adipose-derived stem cells on polycaprolactone-β-tricalcium phosphate scaffold fabricated via selective laser sintering and surface coating ...

3D-printed PCL@BG scaffold integrated with SDF-1α-loaded ...

[23] prepared a novel composite scaffold by coating a 3D-printed PCL ... Three-dimensionally printed polycaprolactone/beta-tricalcium phosphate ...

3D-Printed scaffolds based on poly(Trimethylene carbonate), poly(ε ...

... poly(ε-caprolactone), and β-tricalcium phosphate. PTMC/PCL/TCP scaffolds were manufactured using a biological 3D printing technique. Furthermore, the ...