Events2Join

rough idle and stalling until warm.


Stalling, running rough on warm startup - Modded Mustangs

Stalling, running rough on warm startup · 1. Idle speed incorrect. · 2. Fuel filter clogged and/or water and impurities in fuel system. · 3.

Rough Idle When Cold Outside Until Engine Warms Up

But when I let off, it will almost die and then idle varies between 700 to almost stalling. Once the engine is warmed up, it will idle fine.

Rough idle and stalling when the engine is cold - Ford F150 Forum

My first thought would be check for codes. I would be inclined to think it's either the Throttle body or a vacuum. But I haven't had this issue ...

Cold start rough idle/stalling issue | SaabCentral Forums

I have been posting recently on another thread about a rough idling issue from cold start, leading to several cycles of stalling until my ...

Rough idle and stalling at start when warm - Jeep Forum

Hot at shut off after it sat a little look at pressure. If its low before start it could be a bad injector or a bad fuel pressure regulator.

Engine stall on cold start | GMC Terrain, Equinox, and SRX Forum

It caused rough idle and stalling, and dumped raw fuel into the engine crankcase. The fuel caused the oil level to rise about one-inch ...

Easy start, rough idle until warm?!?! - R3VLimited Forums

ok, whats happening is the ecu cannot tell what temperature the engine is at so it results to a default value, running when warm. You will run ...

Rough idle and stall, but only when hot?

still sounds like a vacuum leak. as long as the carb is cold and choking with extra gas you are ok. soon as it warms up and the choke pulls off ...

Rough idle, dies on cold start after bogging | Team Integra Forums

IACV is usually the problem that makes your car idle erratically. What I would do is wait for the car to be warmed up to its standard operating ...

Very rough start, idle, stall when cold out - BMW 3-Series (E90 E92 ...

vacuum leak somewhere? Cracked VC? Loose vacuum line? Cracked intake manifold? Bad PCV valve? If it goes away after cold start, it generally ...

ROUGH idle on cold start and until warm - Ford Taurus Forum

1st thing I'd do is run it by a parts store and have the codes checked for free if the check engine light is illuminated. May have a vacuum leak ...

Rough Idle/Dies When Cold, Runs Great Warm - Jeep Wrangler Forum

Rough Idle/Dies When Cold, Runs Great Warm ... Pre-Fuel Injection, I would say check the choke. BUT, no choke on EFI! I would start by checking ...

ZJ ZJ 5.2 cold start & stall or rough idle until warm - Jeep Forum

Through all the changes, I've not had one issue with the idle. So first step should be to thoroughly clean both the IAC and the IAC port on the ...

95 Legacy Cold weather stalling bucking until warm

Rough running when cold is a typical symptoms of a bad coolant temp sensor. Stalling can be caused by a few things. A sticky Idle control valve, vacuum leaks, ...

Cold Start/Rough Idle | Chevy Silverado and GMC Sierra Forum

I recently moved from LA to Denver and started having problems the first winter with really rough idle, stalling until it warmed up for a few ...

Rough idle when cold, better when warm | IH8MUD Forum

Intake hose solved my rough idle and almost stalling until complete warmup. I bought a used one from the classified section. Night and day ...

Rough idle until warm - Land Rover Enthusiast Forum

Check the intake hose connections starting at the air box then up to the plenum for vacuum leaks, loose bolts or clamps. Clean out your throttle ...

Rough idle, dying when cold, runs fine warm | Ford Explorer Forums

When ambient temp is warmer when the car is cold, i.e. over 75, it is better at idle. When warmed up it runs fine. This leads me to believe it ...

running rough after warm up missing and stalling - ThirdGen.Org

Disable the egr valve, the egr valve regulator might be letting vacuum to it at idle, which it shouldn't. Subscribe. Related Topics. [IL] ...

Rough idle and stall after cold start - Corvair Forum

Your engine may need a simple tune-up to bring the ignition system to factory specifications, and the idle may be found to be too slow when the ...