Edelbrock Dual Quad tuning tips needed

302 with dual quad edelbrock airgap intake - Club Cobra

If it's over 1" too tall you may need to look at a taller hood scoop, drop the engine, etc. As LMH pointed out, you may be able to go to a pair ...

Dual Quads on a "stock" 302 Questions - Ford Truck Enthusiasts

If you decide to use the Carter's, the tune should be the same as the Edelbrocks. Edelbrock rcommended leaning them out 4% with rod and jet ...

Dual carb setup? - Factory Five Forums

Anyone who can recommend what dual carb setup to go with? Need to ... Edelbrock sells a complete 2x4 setup less air cleaners for $1320.

Why the hate for Edelbrock | Chevy Nova Forum

Finalising my 489 build and always wanted to run the edelbrock dual quads as a nostalgic look to the BB.. Builder doesn't like and this ...

Edelbrock dual quad kit for 351W- any good? - Ford Muscle Forums

I did have an Edelbrock carb on a 289 before and didn't really care for it. It flooded a lot. Any help is appreciated.

RPM Dual-Quad manifold and carb Kit for Small-Block Ford 289-302

To make the installation simple, these kits also include our high-tech progressive throttle linkage, Russell fuel inlet, high-quality Edelbrock intake gaskets, ...

dual quad manifold | Mustang Forums at StangNet

My '79 Cobra has run a best of 12.42 @ 109 with the F-28 and twin Edelbrock 500's. This intake makes power from 2,500 rpms to 6,500 rpms. My brother (who builds ...

Characterizing and Tuning BJ/BK Dual Quad Clones - FE Power

For those new to this build, I have a set of replica (or so I thought) BJ/BK carbs mounted on an Edelbrock RPM Air Gap Dual Quad Manifold with ...

Dual-Quad, Big Carbs? - Home of MOPAR enthusiasts worldwide!

for the CH-28 Dual-Quad intake manifold (for a 440 engine) Edelbrock recommends a pair of 600 cfm carbs for street use. in this combo with a progressive linkage ...

dual quads setup - ClassicOldsmobile.com

... offie 360 dual quads... any suggestions and help would be great.. already placed the Mallory MBI in, the carbs are edelbrock 1406... thanks.

For Those With 440 Dual Quad Set-up - Cuda challenger

Dual carbs always have distribution issues, but proper tuning of the setup will provide excellent driveability. The Edelbrock progressive ...

Multi-carb setup | 460 Ford Forum

I'm wondering what the options are for a multi-carb intake with an rpm range from idle to around 7000 rpm. Summit only lists two dual quad intakes.

Ask Away! with Jeff Smith: Tuning an Edelbrock 1406 Carb to Cure ...

It only improves slightly as air conditions improve, but not much. Using my Edelbrock Tuning manual, I've gone to the #10 setting on the model ...

Amx 390 Dual Quad - The AMC Forum - Page 1

I run a dual-quad Offy with 2 Edelbrock carbs. The linkage is ... But it's in sore need of a tune-up and the PO only did what he had ...

406 SBC Dual Quad Intake Options... - NastyZ28.com

Alot of people has fits with the AFB/Edelbrock carbs cause they are so use to tuning holleys. ... tune and they don't require constant tuning on a ...

312 dual quads - Y-Blocksforever Forums

... tuning Edelbrock 1405 carbs for a dual quad set-up. I'm building a 1957 312 and have a 1957 factory dual quad manifold. I know the original ...

edelbrock carb tuning| Grassroots Motorsports forum |

get a timing light on that thing and dial in about 10 degrees btdc with the vacuum advance unhooked. set the idle mixture screws to about 1.5-2 ...

Edelbrock dual quad carbs and intake - Big Block Dart Forums

It is a nice setup. I wrote an article ... advice on cams ect .The 543ci is a 440souce 11.1 kit please let me know if you need further info.

no more Edelbrock dual quads? - Pontiac GTO Forum

Are there other aluminum stock height dual quad manifolds being manufactured? Thanks for any help.

Which Edelbrock Carbs for Dual Quad Tunnel Ram?

Most of this, IMO, is a carb tuning issue. I'll give Edelbrock carbs an edge on the street friendly bassis of being able to be so easy going.