Energy absorption from composite reinforced with high performance ...

A performance versus cost analysis of prepreg carbon fibre epoxy ...

is in line with previous work on energy absorption in composites which found that a high FVF resulted in a high SEA [6]. The SEA results suggest ...

Enhanced Dynamic Energy Absorption in Carbon/Aramid ...

Test results revealed that energy absorption was 20% to 60% higher in the low-velocity impact test than in static crush, regardless of the ...

Impact Mechanics and High-Energy Absorbing Materials: Review

(1995) develop a simple mode-. II fracture analysis for single circular delamination by treating glass fiber reinforced polymer composite as an isotropic mate-.

Hybrid polymer composites with enhanced energy absorption

However, aramid-basalt composites had high impact strength (116 kJ/m2) and ... the reinforcement contributes to the impact strength and energy absorption ...

Crushing Energy Absorption Capacity of Braided Glass Fiber ...

Fiber-reinforced polymer composites, owing to their high ... Composite materials consist of high-strength and high-stiffness fibers impregnated in a.

Energy absorption of self-reinforced poly(ethylene terephtalate ...

SrP composite materials are ductile, inexpensive and have a high energy absorption potential. The aim of this thesis is to investigate the ...

MECHANICAL PROPERTIES OF ULTRA-HIGH-PERFORMANCE ...

... performance, tensile strength, strain capacity and energy absorption ... [2] Rossi, P., 'High Performance Multimodal Fiber Reinforced Cement Composite (HPMFRCC): ...

Cement and Concrete Composites - Jos Brouwers

This paper investigates the energy absorption capacity of a sustainable Ultra-High Performance Fibre. Reinforced Concrete (UHPFRC) in quasi-static mode and ...

Ballistic Energy Absorption of Thermally Aged DGEBA/TETA System ...

In previous studies, the epoxy matrix composite reinforced with 40% by volume of fique fabric, already tested and with good ballistic ...

Hybrid polymer composites with enhanced energy absorption

However, aramid-basalt composites had high impact strength (116 kJ/m2) and ... the reinforcement contributes to the impact strength and energy ...

Structural performance of ribbed ferrocement plates reinforced with ...

The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume ...

Periodic Architecture for High Performance Shock Absorbing ...

... composite structures as compared to the base material in terms of energy absorption per ... Fundamental aspects of nano-reinforced composites.

Investigation of specific energy absorption of natural fiber ...

The result obtained shows that the increasing thicknesses of the core and cell wall improves the ability of the composite to absorb more energy and the specific ...

Energy Absorption Capability of Composite Materials Applied to - jstor

of energy, which depends on the maintenance of a high crash load and a large ... absorber is a continuous fiber reinforced composite tube. When it is ...

Experimental study of impact energy absorption by reinforced ... - HAL

A strategy to develop dedicated mechanisms for energy absorption of high speed dynamic impact debris at sub-component level is therefore proposed by means of ...

Flexural Behavior of High Performance Cementitious Composites ...

Deflection capacity gains the most from deflection hardening behavior. Besides, substantial increase in load carrying capacity and energy absorption is also ...

Impact Resistance of Fiber Composites: Energy Absorbing ...

Fiber composites have several attractive design attributes for use in structures and structural components. In addition to the well-known high strength and ...

Xenia to unveil new high-performance filaments at Formnext 2024

XECARB SL 3DF. This filament is a high-performance composite thermoplastic made up of bio-based PA11 with 15% carbon fiber reinforcement. The ...

Dynamic Shear Energy Absorption of Ultra-High Performance ...

Energy absorption was weakly correlated to compressive strength. Results are highly sensitive to specimen preparation methods, and there is a demonstrated need ...

Evaluation of microtensile bond strength and marginal adaptation of ...

Long-term durability of a restoration relies on the marginal integrity and its ability to withstand the occlusal forces. Fiber-reinforced composites (FRCs) ...