Prep and Paint Bare Metal Bumper
Painted bumpers (metal finish) - Chevy Tri Five Forum
Painting is an alternative. Standard prep and body work will apply to get a good finish. Having them powder coated is another option. Sand blasting is required.
Isopropyl Alcohol for Paint Prep - Packard - AACA Forums
... clean Painted surfaces, (for bare metal only). Unless you want to loosen the paint for removal. Sanding and Alcohol are only things needed ...
metal bumper paint | DODGE RAM FORUM
Use some etching primer on the bare metal.go find yourself a common good quality semi gloss or flat rattle can .now you have touch up forever.
DIY Paint Prep advice?? | Mustang Forums at StangNet
You can sand off all the original paint to bare metal, which is what ... spray paint.so the new bumpers should be ready to paint shouldnt they?
Bumper Paint | Rising Sun 4WD Club Forum
Got a bumper for my truck. It's bare metal. Thought I would just rattle can it, but what kind of prep should I do?
Best way to remove paint from metal (front winch bumper)??
I stripped my badlands bumper with my grinder with a wire brush cup! ... Nev2dep, I'm removing spray paint so that stuff will probably work good!
"Sandblasting and Restoration" Going to bare metal - Peach Parts
I am considering removing the body chrome and then having the car surface sand blasted. I am seriously considering using Magnet Paint.
Sanding bumpers for paint, what grits? - Forums - SilveradoSS.com
Now if I do it myself, should I remove the bumper cover off the metal bumper for paint? I think for the prep work it would be easier mounted ...
Preping Metal for Paint | Expedition Portal
What is the best way to prep metal for paint? I need to paint my ... I would also invest in some etching primer for the bare metal. it ...
What's the best way to sand down a bumper to get ready for re-paint ...
It was involed in a slight fender bender, and I'm sanding and prepping so I can save some money. It's a Saleen Urethane Bumper. What's the best ...
paint flaking on front bumper - NASIOC
I'm guessing the flat black is the stock bumper not "bare metal" the bumpers are a flat black plastic with out paint. ... paint prep wasn't done ...
Coating for home made bumper | CK5.com
I'd prep it and paint it with POR-15 to start, and work from there. You could get it dipped in a Galvanize tank, it doesn't get much tougher ...
Bumper paint with primer - sanding required? - Bimmerforums.com
if there's paint on the bumper, you must sand down the paint with 400 grit or less. Beware, the lower the grit, the courser the paper, which ...
Prepping bumpers for plating - AutoRestorer
The bumpers need to be stripped down to bare metal. You can remove paint and rust by sand or media blasting but the best way to remove the old chrome is with ...
Do new body panels need to be primed before painting?
It also allows plenty of primer base to be sanded and wet sanded with less chance of sanding down to bare metal. If you're not too concerned ...
Powder coat Bumper spray on bedliner or paint? - Hummer4x4Offroad
Yeah im planning to sand the chrome grill, wasnt going to prime it though. For the metal bumpers going to clean the rust off and prime the bare ...
powder coat or bare metal? | Chevy Colorado & GMC Canyon
If painting do prep as described above. I go to an automotive paint supply store and they have spray paint that works with 2K clear. (Name ...
Bumper Paint - Airstream Forums
... Metal Prep first. I suspect you'll need to do this if you strip and sand to bare metal. Their web site has application directions. My only ...
New Bumper - Paint/ Powdercoat/ Or? | IH8MUD Forum
You can probably get a bumper powdercoated in the $100 range and if you add up the cost of time + effort + prep materials + bedliner or spray ...
Can I sand my car and leave it unpainted, exposing the metal? I'm ...
Why must I sand down the car to bare metal before painting? You don't have to, although ...