SAN using 2 x 5424s to a NetApp FAS2240
SAN using 2 x 5424s to a NetApp FAS2240 | DELL Technologies
I am having a difficult time figuring out how to configure my 2 PC 5424s for use in a SAN. Connected to these switches is a NetApp FAS 2240 with ...
Solved: Re: FAS 2240-2 SAN Cabling Qestions - NetApp Community
If we wanted to use a FC expansion shelf with this unit, could we connect the expansion shelf to one FC port on each controller, with each of ...
Converting a FAS2240-2 to a disk shelf - NetApp Community
Boot the 2240 into maintenance mode and zero the disks. · Power off the 2240 and replace the controllers with IOM6 modules. · Power on the (old) 2240 and change ...
Solved: Configure CIFS on FAS-2240-2 - NetApp Community
Solved: Hello All, We recently racked in our new FAS-2240-2 system with external disk shelves and so far so good.
Adding a DS4246 to FAS2240-4 - NetApp Community
Note the two black X's on my diagram. I do not think I need to connect anything to those two Ethernet ports. Does this look correct?
setup of Netapp FAS 2240-2 system - Spiceworks Community
hey all, looking for a bit of a hand with setting up a netapp san. SAN has 4 200gb ssd's and 20 900gb 10k sas drives, dual controllers and ...
NetApp FAS2240-2 10Gb iSCSI SAN 24x 900GB 10K 2.5 ... - eBay
OnTap version 8.2.3 installed. NetApp FAS2240-2 10Gb iSCSI SAN. NetApp Release 8.2.3 7-Mode. Dell, HP, IBM, NetApp, Cisco, Juniper, Brocade, and more. 2x ...
FAS2240.pdf - NetApp Community
The FAS2240-2 provides up to 24 small-form-factor SAS disk drives using the 2U, 19” deep chassis of the DS2246 disk shelf. This makes it the ideal candidate for ...
SAN configuration overview - NetApp
You can configure your SAN so that your storage solution attaches to your hosts through one or more switches. If you are using iSCSI, you can also configure ...