Biomechanical Analysis of Femoral Tunnel Pull|out Angles for ...

Biomechanical analysis of femoral tunnel pull-out angles for anterior ...

The strength of anterior cruciate ligament reconstruction fixation increases with increasing divergence between the tension angle and femoral tunnel, ...

Biomechanical Analysis of Femoral Tunnel Pull-out Angles for ...

with the strength and stability of ACL graft fixation at the femoral and tibial tunnels.6,13,14,18,19 To evaluate the strength and stability of ACL fixation ...

Biomechanical Analysis of Femoral Tunnel Pull-out Angles for ...

In these studies, the angle of pull relative to the femoral tunnel was usually set directly in line with the bone tunnel, a condition that is only achieved in ...

(PDF) Biomechanical Analysis of Femoral Tunnel Pull-out Angles for ...

The strength of anterior cruciate ligament reconstruction fixation increases with increasing divergence between the tension angle and femoral ...

[PDF] Biomechanical Analysis of Femoral Tunnel Pull-out Angles for ...

The strength of anterior cruciate ligament reconstruction fixation increases with increasing divergence between the tension angle and femoral tunnel, ...

Optimal angles for independent femoral tunnel drillings to prevent ...

The current study suggested the sagittal and coronal obliquity angles of the femoral tunnel during ACL reconstruction can significantly ...

Biomechanical analysis of femoral tunnel pull-out angles for anterior ...

Title. Biomechanical analysis of femoral tunnel pull-out angles for anterior cruciate ligament reconstruction with bioabsorbable and metal interference ...

Biomechanical Analysis of Femoral Tunnel Pull-out Angles for ...

Biomechanical Analysis of Femoral Tunnel Pull-out Angles for Anterior Cruciate Ligament Reconstruction With Bioabsorbable and Metal Interlerence Screws.

Influence Of Femoral Tunnel Interference Screw Diameter On Pull ...

No difference in pull out strength or failure mode was observed among interference screw diameters. These findings suggest that there is no difference in ACL ...

Influence of femoral tunnel exit on the 3D graft bending angle in ...

Abstract. Purpose · Introduction. Anterior cruciate ligament (ACL) reconstruction is widely used to restore knee function and successful graft ...

Femoral Tunnel Geometry and Graft Inclination Angles in Anterior ...

In the MRIs, the mean coronal graft inclination was 69.2 ± 4.7°, and the mean sagittal graft inclination was 52.4 ± 4.6°. The results of this study demonstrated ...

Influence of the tunnel angle in ACL reconstructions on the ...

Our results showed that impingement only depends on the femoral tunnel angle. On the contrary, laxity principally depends on the tibial tunnel angle. The angle ...

The Graft/Tunnel Angles in Posterior Cruciate Ligament ...

angles using outside-in and inside-out techniques for femoral tunnel placement. Type of Study: A cadaveric, biomechanical comparison. Methods: One ...

Different femoral tunnel placement in posterior cruciate ligament ...

At present, there is no consensus on the optimal biomechanical method for Posterior cruciate ligament (PCL) reconstruction, ...

The Femoral Tunnel Drilling Angle at 45° Coronal and 45° Sagittal ...

Conclusions: The femoral tunnel drilling angle could affect both the stress and strain distribution on the femoral tunnel, tibial tunnel, and graft. A femoral ...

Femoral Graft-Tunnel Angles in Posterior Cruciate Ligament ...

In addition, the femoral graft-tunnel angles for the outside-in and modified inside-out techniques were significantly less acute than the tibial graft-tunnel ...

Effects of femoral tunnel placement on knee laxity and forces in an ...

This study identified the biomechanical effects of variations in femoral tunnel position during ACL reconstruction. ... femoral attachment location, flexion angle ...

Correlation between femoral tunnel angle and gait analysis results ...

Wang et al. [31] reported that the femoral tunnel angle created using the anteromedial portal technique for single-bundle, anatomic ACLR affected knee joint ...

Influence of the Femoral Tunnel Location and Angle on the Contact ...

A malpositioned femoral tunnel and an acute femoral tunnel angle may increase the mechanical stress in the femoral tunnel. Study Design. Controlled laboratory ...

Femoral Graft Bending Angle and Femoral Tunnel Geometry of ...

The mean anteromedial (AM) and posterolateral (PL) femoral graft bending angles of group II (97.3° ± 8.3° and 97.4° ± 8.6°, respectively) were significantly ...