DOS through the serial port using the CTTY command
DOS through the serial port using the CTTY command - Reddit
On the DOS side use CTTY COM1, or whatever serial port you are going to use. Before doing it though, try doing something simple like "COPY ...
MS-DOS v6.22 Help: CTTY - Manmrk +-------------------------------------+
... device you want to use to type MS-DOS commands. Valid values ... Setting the terminal device with COMMAND In addition to the CTTY command ...
(1/58) TTY/SLIP/PPP: Logging in to MS-DOS via CTTY COM1
How to set up an #RS232 port and how to remotely log in into #DOS via the #CTTY command on a #serial #COM1: line is the yet harmless topic ...
Purpose: Changes the standard I/O (Input/Output) device to an auxiliary device. ... The CTTY command is used only for I/O (input/output) devices such as a monitor ...
If a serial port is to be used for an input device, the baud rate, parity, bits, and stop bit must be established with the MODE-Serial Port ...
File editing using the CTTY command - HP Palmtop Paper
Once you've got the two computers linked up with the serial cable, and with the terminal program running on the desktop computer, you can type in the CTTY COM1 ...
How do I connect a command prompt to a serial line in MS-DOS 6.22?
... use a serial connection, under DOS you'd change the TTY: ctty com1. This will work with any character device (with varying results if the ...
The CTTY command has no effect on these programs; it affects only programs that use MS-DOS for reading keyboard input and displaying output. Setting the ...
MSDOS through serial port - Google Groups
I think the command you are after is CTTY. From MS-DOS 6.22 Help... CTTY. Changes the terminal device used to control your computer. Use the CTTY command if you ...
serial terminal as monitor on ms-dos?
Look at the CTTY command. Set up the serial terminal in autoexec.bat with a CTTY COM to transfer control to the correct serial port. The ...
Trouble Accessing COM ports MSDOS 6.22 - CTTY mystery
We have an application that *used* to work fine. We use the old CTTY command to communication with a DOS computer. Before the problems occurred, we could
Controlling Machines by Serial Port
After the “CTTY COM2” DOS command is entered, all further DOS input/output is redirected to COM2, which is connected to the TestMonitor window.
Transfer file via Serial with DOS - VOGONS
Fastlynx 3.3 appears to have given me the most success thus far, because it makes such an assumption. It guides you to use the MODE command and ...
Ctty (Command) | Encyclopedia MDPI
This article presents a list of commands used by DOS operating systems, especially as used on x86-based IBM PC compatibles (PCs).
And it works very well as a serial printer cable from Linux (using a hardware DE-9 port). ... DOS has a little-used command called ctty, 'change ...
After opening the serial port, use MODE and CTTY command to configure console redirection. A batch file, 86ComSh.BAT, is provided as part of ...
Ctty is an MS-DOS utility that lets you change the standard computer input/output device. Availability; Ctty syntax; Ctty examples. Availability.
How can I use a terminal software like PuTTY to login to a DOS PC ...
... DOS PC that functions as a Host via serial connection? Ask ... serial port params using MODE then launching COMMAND.COM COM1 or CTTY COM ?
Remote install for Tranxit - Support - Dynabook
2. Connect the two computers using a serial cable. ... 4. In the remote computer type "MODE COMx:9600, N, 8, 1, P" at the DOS prompt, where x is the number of the ...
Keyboard HID emulation for MS-DOS - Raspberry Pi Forums
Original DOS had the CTTY command which enabled serial input from the normal COM port.. User avatar. rpdom ...