3.0 to completely ignore a failing disk?, Wrongly ignores drives without reported ID_ATA_FEATURE_SETs, Why would a computer stop recognizing some USB devices but not ... ">
Events2Join
Disk ignored because of id_bus · Issue

Disk ignored because of id_bus · Issue

Ceph rejecting drive because of "id_bus" - Reddit

I am trying to setup ceph on a raspberry pi cluster with nvme drives connected over usb. I am running into an issue where the drives are being rejected due to ...

Data corruption and disk errors troubleshooting guidance

This issue most often occurs when something disrupts the system's communication with a disk, such as a SAN fabric error or a SCSI bus problem.

ReaR fails while verifying the disklayout when a disk has a 0 size

Description of the issue (ideally so that others can reproduce it):. When plugging in a USB multi-card reader (SD / MicroSD) which has no card ...

What is a bus error? Is it different from a segmentation fault?

This worked well in one thread, but when using openMP this drives to bus error, because Mac OS X has very limited stack size for non-main ...

Force ZFS to ignore checksum errors without removing the offending ...

I've confirmed the unreliable drive is due to a software issue or a hardware issue with the USB bus on the server, and not an unreliable cable ...

How to tell Linux Kernel > 3.0 to completely ignore a failing disk?

The problem is that the SSD disk is. soldered to the main board ... Because the delay on boot could be caused earlier by the kernel or ...

Wrongly ignores drives without reported ID_ATA_FEATURE_SETs

I traced the error back to the "hdparm_try_apm" function in "/usr/lib/hdparm/hdparm-functions", which checks via "udevadm" for the " ...

Why would a computer stop recognizing some USB devices but not ...

The cause of such a USB drive not showing up error may be due to some hardware or software setting/permission in the system and can be fixed ...

Public - Viewpoint cannot boot - issue with /data mount and device ...

Because of this /data is unable to mount and ...

How To Fix External Hard Disk Drive Not Recognized In Windows?

Errors can be access denial, file system errors, device not formatted alerts, unsupported file system messages, or indicating fatal hardware issues that may ...

447315 – parted error: Can't open /dev/xvda while probing disks ...

The xvda device nodes are created because a Xen block device is found in /sys/bus/xen/devices/xvd-* ; if those sysfs entries aren't there, anaconda won't create ...

201685 – Incorrect disk IO caused by blk-mq direct issue can lead to ...

This bug is a really scary one, both because of how the severity of its consequences, *and* because neither of us can reproduce it on our own systems or ...

Kickstart Syntax Reference - Fedora Docs

For example, to use disk sda during installation and ignore all other disks: ... The error message will direct you to where the cause of the failure is logged.

All Seagate ST20000NM007D drives ignoring PowerChoice (EPC ...

The warning basically says to check the HBA documentation to see if this SATA feature is supported or not. I have seen this same issue a few ...

Drive | UTM Documentation

Disk Image The drive will be mounted in the bus specified in “interface” with a non-removable media type. ... Deprecated Linux RAM Disk “Interface” is ignored and ...

PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e5 ...

If you cannot install the OS because of this problem, you can edit the boot order in GRUB. You can do that when you boot up for a ...