Driver side passenger automatic lock and power window don't work

My driver side passenger door doesn't lock when locking the vehicle (either with the remote or manually turning the key). The power window also doesn't work.

Power Locks and passenger window controls not working on driver's ...

Look for a YouTube video on how to remove your door switch assembly without breaking a lot of plastic bits. Start checking for power and grounds ...

Drivers side window,power door locks wont work - iFixit

The most likely cause of your problem is the master switch in the drivers door. The windows and the locks are on two separate circuits.

The power window in passenger door doesn't work from its ... - Quora

Check the drivers side power window switch. There should be a feature available there to turn off the other doors power windows. Make sure that ...

Driver door power window and lock controls don't work. Passenger ...

Driver door power window and lock controls don't work. Passenger. Window won't work either but lock does. I have checked the fuse and relay and both look fine.

Windows & Locks not-functioning from the door panel switches only ...

Could just be the driver door window/lock switch cluster...they fail and cause weird problems with both windows and locks. The fact that the fob ...

My door locks and power windows will not work - JustAnswer

Turn OFF the ignition. Disconnect the driver window motor. Turn ON the ignition, with the engine OFF. Probe the power window motor left front up ...

How To Fix Passenger Side Window Switch and Automatic Power ...

Passenger Side Power Window Switch not working in a Toyota? Toyota Power Windows Not Working? Auto Window Switch Not Working in a Toyota?

Power Window Not Working on the Passenger Side or Driver Side?

If your power windows are not working on the driver or passenger side, the causes of the window not working could be the fuse, wires, ...

Causes of Car Power Window and Door Lock Malfunctions

Window malfunctions often are caused by a faulty window regulator or track, or a broken motor, cable pulley, or window switch.

Driver door lock and power windows don't work - Maxima Forums

Make sure there isn't a short in the wiring harness in the door and especially in the door jam area where it passes from the door to the body.

Driver's Power Window and Power Door Locks Fixed! - 355 Nation

i just had this same issue of power locks and drivers side window not working. just disconnected the neg. battery cable for 30 min and ...

Drivers Side ONLY Power Window and Power Door Lock Stops...

Certainly sounds like some of the driver's door master switches are faulty considering some functions still work. Apparently they are plug and ...

What could cause my Window and Power Lock controls to only work ...

The drivers power lock wire, the drivers window wire, and the wire that can prevent the other windows from going down would all simultaneously ...

All power windows but the drivers side front window stopped working...

I suspect the relay has failed or the master power window switch, which provides the ground to the control side of the power window relay, has ...

How to Diagnose Broken Power Window/Door Locks ... - YouTube

1A Auto shows you how to fix a power window switch, door lock switch, and memory function wiring. This video is applicable to the 03 Mercury ...

Driver door won't lock automatic | Chevy Silverado and GMC Sierra ...

Sometimes the switch contacts get dirty and just need to be cleaned. It is a free an fairly easy/quick thing to try. I used an eraser on the ...

Power windows and locks not working. | Toyota Nation Forum

If they don;t work, it stil lcaould be the master control since the circuits al channel back to the master on the drivers door. make sure the ...

Passenger windows & locks do not work! - Honda Accord Forum

Part of the circuits for the power window and door locks runs through all or part of these control units. This test is to check the ground wire ...

Issue w/ Power Locks & Windows | Nissan Altima Forum

That wire comes out of the BCM to all 4 window switches, so if there's no power there then you either have an open wire at the BCM or the BCM is ...