- Effect of strain rate on tensile mechanical properties of high|purity ...🔍
- The effect of strain rate on mechanical properties and microstructure ...🔍
- Effect of Strain Rate on the Tensile Mechanical Properties of ...🔍
- Strain rate effects on the mechanical properties of polymer ...🔍
- The Strain Rate Effect🔍
- Effects of strain rate on mechanical properties and deformation ...🔍
- Effect of Strain Rate on Tensile Properties of Carbon Fiber ...🔍
- Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and ...🔍
Effect of Strain Rate on Tensile Mechanical Properties of High
Effect of strain rate on tensile mechanical properties of high-purity ...
The strain at failure (ranging from 0.4 to 0.9) is very sensitive to crystal orientation and maximal at ~10 -2 s -1 for crystals oriented close to the center ...
The effect of strain rate on mechanical properties and microstructure ...
As the strain rate increases, yield strength, ultimate tensile strength and uniform elongation decrease first and then increase.
Effect of Strain Rate on the Tensile Mechanical Properties of ...
Specimens were deformed in tension at strain rates ranging from 10−3 to ~ 1600 s−1. The 0.2% yield stress and ultimate tensile strength (UTS) of ...
Strain rate effects on the mechanical properties of polymer ...
verse tensile properties on strain rate of a high perfor- mance carbon/epoxy composite loaded in transverse tension was investigated by Melin and Asp.5 Dog ...
The Strain Rate Effect | Plastics Technology
High strain rates—events that occur over a short period of time—tend to favor the elastic properties of materials ...
A modest increase in ultimate tensile strength and minimal decrease in uniform elongation were noted at higher strain rates, suggesting ...
Effect of Strain Rate on Tensile Properties of Carbon Fiber ...
Rajat Kapoor et al. [11] studied the mechanical properties of fiber-reinforced composites under high strain rates and found that the peak stress ...
Effect of Strain Rate on the Tensile Behavior of CoCrFeNi and ...
HEAs stress-strain curves, modulus of elasticity, yield strength, ultimate strength, strain-rate sensitivity and work hardening rates were calculated with the ...
Strain Rate Effect on Tensile Behavior for a High Specific Strength ...
The strain rate effect on the tensile behaviors of a high specific strength steel (HSSS) with dual-phase microstructure has been ...
(PDF) Effect of strain rate on tensile and work hardening properties ...
The yield stress and tensile strength of AZ31 were found to be strain rate dependent but not for AZ61. The elongation of AZ31 were approximately about 15% for ...
The Effects of Strain Rates on Mechanical Properties and Failure ...
The previous results indicated that the composite was a strain rate-dependent material, and its tensile strength and stiffness increased with ...
Effect of Strain Rate and Temperature on the Tensile Properties of ...
Strain rate and temperature are influential factors that significantly impact the mechanical properties of long glass fiber-reinforced ...
The effect of strain rate and temperature on the mechanical ...
The strain rate is an important parameter affecting steel's mechanical properties. When steel is subjected to an external force or load, it deforms or changes ...
Effect of temperature and strain rate on tensile mechanical ...
It was also observed that the tensile yield strength decreased as the strain rate decreased. The tensile properties were moderately reduced at high temperatures ...
Lab 1: Strain Rate Effect - YouTube
Effect of Strain Rate on tensile mechanical properties.
HIGH STRAIN RATE TENSILE PROPERTIES OF ANNEALED 2 1/4 ...
Above 0.1/sec at 25°C, both the yield stress and the ultimate tensile strength increased rapidly with increasing strain rate. As the temperature was increased, ...
In Our Element: How Do Strain Changes Affect Material ... - Materion
The strain rate sensitivity exponent governs how a material deforms. If the exponent is positive, then tensile properties such as yield strength ...
Mechanical properties at high strain rates - HAL
The strain rate affects also the ductile fracture conditions as well as the transition temperature to clearage fracture. Constitutive equations.
Effect Of Strain Rate On Material Properties Of Sheet Steels
A total of 54 compressive tests and 124 tensile tests were conducted under different strain rates for the three selected steel materials. The ...
Effect of Strain Rate on Tensile Behavior of Sn-9Zn-xAg-ySb
It is seen that the tensile strength increases and the ductility decrease with increasing the strain rate over the investigated range.