Effects of carbon nanotubes on open|hole carbon fiber reinforced ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced ...

It was concluded that adding amount of MWCNTs can reduce the stress concentration, improve the strength and fracture interface stiffness of laminate specimens.

Effects of carbon nanotubes on open-hole carbon fiber reinforced ...

[8] verified the reinforcing effect of multiwalled carbon nanotubes (MWCNTs)modified epoxy resin on CFRP laminates through experiments and numerical simulations ...

Multi-Functional Carbon Fibre Composites using Carbon Nanotubes ...

A CNT modified-CFRP show 300%, 450% and 230% improvements in the electrical conductivity on the 'surface', 'through-thickness' and 'volume' ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites ; Journal: Materials Today Communications, 2020, p. 101106 ; Publisher: ...

Enhancing the Mechanical Performance of Fiber‐Reinforced ...

Carbon nanotubes (CNTs) are an economical and multi-functional nanofiller that can further elevate the versatile performance of fiber-reinforced polymer (FRP).

Ultrafast carbon nanotubes growth on recycled carbon fibers and ...

Finally, to determine the interlaminar resistance, a double cantilever beam (DCB) test was performed. The results indicate that with Poptube ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced ...

DOI: 10.1016/J.MTCOMM.2020.101106) Properties and damage evolution of open-hole carbon fiber-reinforced composite laminates without/with MWCNTs during ...

Effect of carbon nanotubes on the electrical, thermal, mechanical ...

The electrical properties of unidirectional continuous carbon fiber reinforced composites exhibits strong anisotropy[19]. As an excellent conductor, CNTs can ...

Multifunctional Carbon Nanotube Reinforced Polymer/Fiber ...

The aligned CNTs acted as reinforcing agents, which provided a crack bridging effect. The same author showed in another work that the interlaminar fracture ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced ...

Effects of carbon nanotubes on open-hole carbon fiber reinforced polymer composites ; ISSN/ISBN: 0038-3872 ; 2020 · 10.1016/j.mtcomm.2020.101106. Document: ...

Effects of carbon nanotubes and carbon fibers on the properties of ...

Our findings indicate that carbon fiber, when present at a concentration of up to 0.5%, the effect on the fluidity of UHPC is only about 1.05%. However, the ...

Multiscale Carbon Nanotube−Carbon Fiber Reinforcement for ...

It has been demonstrated that the combination of traditional carbon fibers with carbon nanotubes led to enhanced fiber/polymer interfacial load ...

Progressive damage and tensile failure of open‐hole carbon fiber ...

Download Citation | Progressive damage and tensile failure of open‐hole carbon fiber polymer composites reinforced by carbon nanotubes | Progressive damage ...

Enhancement of open hole tensile strength via alignment of carbon ...

Enhancement of open hole tensile strength via alignment of carbon nanotubes infused in glass fiber - epoxy - CNT multi-scale composites.

Growing Carbon Nanotubes In Situ Surrounding Carbon Fiber ...

To our knowledge, there are very few studies conducted on growing CNTs on the CF surface via the CVD to improve the bonding strength of laminated CFRP ...

Effect of carbon nanotube on the mechanical properties of short ...

The results showed that the introduction of CNTs could effectively enhance the tensile modulus of 3D printed SCF/PEEK, whilst it led to a ...

Progressive damage and tensile failure of open‐hole carbon fiber ...

Semantic Scholar extracted view of "Progressive damage and tensile failure of open‐hole carbon fiber polymer composites reinforced by carbon nanotubes" by ...

Experimental study of impact mechanical and microstructural ... - NCBI

These carbon nanotubes with strong water absorption characteristics on the surface of carbon fiber resulted in more sufficient hydration ...

Carbon Fiber-Carbon Nanotube Yarn Hybrid Reinforcement | T2 Portal

Formation of the inventive polymer composite matrix begins by growing carbon nanotubes directly on a veil substrate. The carbon nanotubes are grown from both ...

Interface engineering of carbon fiber composites using CNT: A review

Furthermore, it discusses the potential improvements in thermal and electrical conductivity achievable by incorporating CNTs at the interface, ...