Evaluation of the mechanical properties and durability of cement ...

In fact, the replacement of cement with nanosilica is more efficient at 28 days, were the electrical resistivity is improved by 328.6% for 5L100 ...

Evaluation of Durability and Mechanical Properties of the Cement ...

The studied materials are mortar cubes in which the mechanical strength has been evaluated. The dimensions of the samples are around 50×50×50 mm3 and, according ...

The study shows that replacing 10 % cement with RP increases mortar compressive strength by 13.28 % after 90 days, and a combination of 15 % GP and RP improves ...

Evaluation of the mechanical properties and durability of cement ...

The compressive strength increases from 16% to 53% and 11% to 62% respectively for 7 and 28 days and density increase from 2% to 8%, for the increase in ...

Evaluation of Mechanical Properties and Durability of Concrete ...

The results revealed that using slag and cement carbon nanostructures improve the durability of concrete pavements.

Evaluation of the Mechanical Properties of Normal Concrete ... - MDPI

The compressive and tensile strength as well as the permeability of concrete containing nanoparticles were measured and compared to those of ...

Mechanical Properties and Durability of Sustainable Concrete ...

Figure 6 illustrates the relative splitting tensile strength for concrete containing various industrial solid wastes, which is defined as the ...

Evaluation of the mechanical properties of high-strength cement ...

Conclusions · Optimum dosages of MK, at ambient temperature, were 12%, 6%, and 6% in cement paste with w/b of 0.3, 0.35, and 0.4, respectively.

Modelling the mechanical properties of concrete produced with ...

This specimen has a diameter of 100 mm and a length of 150 mm. Figure 7 shows that the split tensile strength of biomedical waste ash concrete ...

Evaluation of mechanical properties for high strength and ultrahigh ...

M.H. (1995), "Composition of reactive powder concretes", Cement Concrete Res., 25(7), 1501-1511. Mingzhe, A.N., Ziruo, Y.U., Sun, M., Zheng, S. and Liang, L. ( ...

Performance evaluation of the mechanical and durability properties ...

The compressive strength results obtained for the three categories of fiber reinforced concrete ranged between 7.2 and 12.8 N/mm2, with the ...

A Review on the Effect of Mechanical Properties and Durability of ...

This work discussed the following concrete properties: compressive strength, water absorption, chloride penetration, carbonation, and modulus of elasticity.

Evaluation of Mechanical Properties of Concrete - ProQuest

Concrete is a material with high compressive strength, but predisposed to shrinkage cracking, rapid cracks propagation, and brittle failures.

[Retracted] Experimental Analysis of Mechanical Properties and ...

It was found by the present study that the average compressive strength of cement-based composite with carbon nanotube is 84.09 MPa.

Mechanical properties and durability of roller compacted concrete ...

Fakhri and Amoosoltani (Citation2017) investigated the crack behaviour analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and ...

Evaluation Of Mechanical And Durability Properties Of Concrete ...

48 References · Effect of Replacement of Cement with Dolomite Powder on the Mechanical Properties of Concrete · Assessment of Concrete Strength Using Partial ...

Evaluation of the mechanical performance and durability of concrete ...

T. Mounika and G. L. Bhuvaneswari, “Strength characteristics of concrete by replacing natural sand by M-sand for M20 and M30 grade concrete,” International ...

Evaluation of the mechanical properties of concrete considering the ...

This paper aims to investigate mechanical properties of concrete(especially compressive strength and modulus of elasticity) with various water-cement ratio ...

Evaluation of mechanical properties and durability of engineered ...

Tensile strain capacity exceeding 5% has been demonstrated on ECC reinforced with polyethylene and polyvinyl alcohol (PVA) fibers. Unlike ordinary cement-based ...

Evaluation of Mechanical and Durability - ProQuest

The properties evaluated in this study include compressive, tensile, and flexural strength, magnesium sulfate and sulfuric acid attack, surface resistivity, ...