Evolution of point defects in mechanical cracks of fused silica after ...

The objective of this work is to better understanding of the defect annihilation mechanism after CO 2 laser melting.

Evolution of point defects in mechanical cracks of fused silica after CO2 laser melting. Liu et al., Opt. Mater. Express 14(2), 414 (2024). https://doi.org ...

Evolution Of Point Defects Research Articles - R Discovery

Evolution of point defects in mechanical cracks of fused silica after CO2 laser melting. The traditional polishing method inevitably results in subsurface ...

(PDF) Evolution of the point defects involved under the action of ...

Point defects with different species are concentrated on most mechanically machined fused silica optical surfaces with surface defects, ...

Evolution of physical and mechanical properties of fused silica after ...

In this study, the physical and mechanical properties of fused silica are studied after various depths of subsurface damage removal by reactive ion etching ...

The PL spectra of scratched and non-scratched areas. - ResearchGate

from publication: Evolution of point defects in mechanical cracks of fused silica after CO2 laser melting | The traditional polishing method inevitably ...

Evolution of the point defects involved under the action of ... - OUCI

Point defects with different species are concentrated on most mechanically machined fused silica optical surfaces with surface defects, which would sharply ...

Evolution of the point defects involved under the action ... - NASA ADS

Point defects with different species are concentrated on most mechanically machined fused silica optical surfaces with surface defects, which would sharply ...

Evolution of intrinsic defects and ring structures on the surface of ...

The laser conditioning can effectively reduce the intrinsic defect contents in the surface layer of mechanically processed fused silica. However ...

Morphology evolution of Vickers indentation in fused silica glass ...

found that cracks produced by pre-processing, such as grinding [13], were first opened by plasma processing and then repaired by sufficient ...

Evolution of intrinsic defects and ring structures on the surface of ...

2024: Evolution of point defects in mechanical cracks of fused silica after CO2 laser melting Optical Materials Express 14(2) · Liu, T.; Yang, K.; Zhang, Z ...

Evolution of Physical and Mechanical Properties of Fused Silica ...

Evolution of Physical and Mechanical Properties of Fused Silica after Subsurface Damage Layer Removal by Rie Treatment ... J Qian, Tunable point defects in ...

A Novel Method to Characterize the Residual Stress on the Fused ...

... fused silica (non-crystal material) components (e.g., Hemispherical Shell Resonator) ... Fused Silica Surface Based on the evolution of the atomic point defects.

Laser‐Induced Point Defects in Fused Silica Irradiated by UV Laser ...

However, UV optical properties of fused silica are often degraded by preexisting and laser-induced point defects, since they induce optical ...

Evolution of the point defects involved under the action of ...

Point defects with different species are concentrated on most mechanically machined fused silica optical surfaces with surface defects, ...

Evolution of physical and mechanical properties of fused silica after ...

amount and distribution of surface defects such as crack and pore by molecules ... Zhao, Tunable point defects in hydroxyl fused ... photoluminescence-related ...

Analysis method of point defects evolution in fused silica under multi ...

It is revealed that the rate of defect evolution in fused silica is more influenced by temperature than stress, and a temperature threshold can ...

Phase-Field Modeling of Fused Silica Cone-Crack Vickers Indentation

In this paper, a 3D phase-field model for brittle fracture is applied for analyzing the complex fracture patterns appearing during the Vickers indentation ...

Research on the Mechanism of Atmospheric ... - SPIE Digital Library

evolution of ground fused silica parts using APPP as well [9]. ... processing after grinding the fused silica glass. ... after mechanical machining. This.

The Role of Point Defects and Defect Complexes in Silicon Device ...

The loops were found to be stable after 900°C, 10 seconds annealing in non-silicided material, and their formation was only slightly affected by the TiSiz ...