Friction and Wear of DLC Coating Deposited on M2 Steel via μW ...

The friction and wear of diamond-like carbon (DLC) coating deposited on a M2 steel substrate (DLC-Steel) via microwave excited plasma ...

Friction and wear characteristics of DLC-terminated coatings ...

This work tests the possibility of depositing self-lubricating Diamond-Like Carbon (DLC)-terminated films on AlSi10Mg built by SLM and subjected to different ...

Effect of Electrical Current on Sliding Friction and Wear Mechanisms ...

The a-C coatings exhibited lower coefficient of friction (COF) values and reduced volumetric wear losses up to 1500 mA, while ta-C coatings ...

Tribological Behaviour of W-Containing Diamond-Like Carbon (DLC ...

low friction and wear behaviour of the NH-DLC coatings. It was suggested ... The H-DLC coatings were deposited on M2 steel substrates with 0.10 μm Cr ...

Friction-induced structural transformations of DLC coatings under ...

The DLC films tested in this study were deposited on AISI-H13 steel disks with a room- temperature PECVD process that used either pure C2H2, CH4, or a CH4/H2 ...

Study of the Industrial Application of Diamond-Like Carbon Coatings ...

[3]. The tribological performance on steel substrates has been extensively studied, particularly in the context of friction and wear properties. De Feo et al. [ ...

Low Wear and Low Friction DLC Coating With Good Adhesion to ...

The friction coefficients of our DLC-against-DLC tribological pair are found to be always less than 0.1, while wear rates are extremely low, ...

Friction and Wear of Various DLC Films in Water and Air Environments

... Results were in good agreement with other relevant literature regarding the friction coefficient of a steel/DLC contact in water [28,33,36]. Furthermore, ...

Tribological performance of an H-DLC coating prepared by PECVD

Keywords: Hydrogenated Diamond-like carbon; friction; wear; AISI 52100 steel, dry sliding. ... DLC coating as deposited on steel plate. The spectra was ...

A Comparative Study in the Tribological Behavior of DLC Coatings ...

The combination of a high hardness and good wear resistance with a low coefficient of friction represents the main tribological reasons for using this type of ...

Tribological Behaviour of W-DLC against an Aluminium Alloy ...

The NH-DLC showed low friction and wear in water [13], ethanol and humid ... The W-DLC coatings were deposited on M2 steel coupons using a cathodic arc ...

Study on the Tribological Behavior of Wear and Friction Coefficient ...

Based on this concern, this study proposed the evaluation of the tribological behavior of the DLC coating deposited on AISI M35 steel, seeking to predict its ...

The influence of DLC coating on EHL friction coefficient

of 0.1-0.2) and wear rates compared to steel on steel ... Tribobond 44 is an. a-C:Cr coating deposited using reactive PVD processes with a deposition temperature ...

Optimizing gas pressure for enhanced tribological properties of DLC ...

Additionally, the mechanical properties of the coating were investigated through nanoindentation testing. The wear resistance of coating has ...

Carbon - TSAPPS at NIST

Here, we evaluated the structural, mechanical, and tribological properties of Si-containing DLC coatings with silicon content fraction of 11% ...

The Influence of H Content on the Properties of aC(W):H Coatings

Diamond-like carbon (DLC) coatings are used today in a wide range of applications where low friction and wear are required [1]. Composite DLC coatings can have ...

Review of Diamond like Carbon Films Fabrications and Applications ...

The DLC coating deposited using magnetron sputtering technique ... DLC coatings also have the ability to reduce friction and wear between the.

Adhesion Studies of Diamond-Like Carbon Films Deposited on ...

DLC films were subsequently grown from methane using plasma enhanced chemical vapor deposition. The samples were characterized with Raman scattering ...

Tribological properties of Ti‐doped diamond‐like carbon coatings ...

deposited Ti4at.%‐DLC coating and wear tracks after friction tests under ... ilar low and stable friction coefficient and the wear rate of coatings and steel ...

Comprehension of friction and wear mechanism of DLC coatings in ...

These coatings are therefore lubricated with traditional engine oils that were originally developed for steel parts. However, the effect of ...