Gamepad issue with registering both analog trigger pulls at ...

When both triggers are pressed, the axis gets set to 0, which means pressing both triggers won't actuate either fire button.

However, I have noticed that games only recognize the trigger inputs when they're at their maximum value (full press). This is somewhat ...

install the xpadneo driver and see if the triggers are recognized. You'll have to re-pair and re-configure the input again. add the L2/R2 ...

also while I was testing games I figured out that the games that are having the issues are actually registering my inputs as another input. the ...

Previously, I always mapped both the buttons and triggers as you suggest above. What I was trying to say in my original post was that just for a ...

... issue is still there trying both... - DualShock 4 CHU-ZCT2U. ... When I assembled my controller after changing the analog cap whenever I ...

Check any loose connection or connection error from both the controller as well as the PC side. ... How can I fix my PS4 controller right analog ...

The Trigger (aim) buttons on the DS4 are problematic, but these methods may help fix some of the issues.

If you have a modern Xbox controller (Xbox One, Series X or S) you may be experiencing issues with the LT, RT, RB, and LB buttons, ...

The only solution I have found after encountering this issue was the apply pressure to the CPU on the motherboard which allows the ...

A fine balance between thumbstick deadzone and stickdrift must be attained. You want the smallest inputs registered without your character ...

Joystick Gremlin detects the triggers as a single analog axis unfortunately. You can't use it in scenario where you have to pull both triggers ...

I got it working. What I did was turn analog off, and set both the full and soft pull actions to activate with each trigger. No idea which part ...

Many times this is because the Analog Output is bound to a trigger as well. This happens often for games with Xbox Controller Support if the ...

Yep, I had this. Just delete your current controller profile and let it create a fresh one. Triggers should then work in an analog fashion and ...

Tested another wired 360 controller on the troubled RetroPie. Not working. Run jstest /dev/input/js0. Both triggers register -32767 at rest and ...

I was initially testing with this one by Selva Sundar, and was seeing that no analog inputs (sticks or triggers) were registering. I then ...

restart your pc and open the app again with the controller still plugged in and see if it will automatically add the wireless controller when it ...

... triggers would not register any input with the Gamepad Tester that avilches used. ... 3rc1 and both have the same issue. I was even going ...

... both triggers are mapped to L, R, L-analog and R-analog, so I get full analogue triggers. They cannot be used at the same time though - when ...