Events2Join

Heater core hose routing and question


quick heater hose routing question - Ford Truck Enthusiasts Forums

I guess the easiest way to put it is the heater core has a left and right pipe. Im just using aftermarket coolant hoses.. Not the things they ...

Heater Core Hose Routing Diagram Needed - 2CarPros

Welcome to 2CarPros. Not a problem. If you look at the attached picture, it shows coolant flow through the heater core. The left side is supply ...

Heater core hose routing and question | V8buick.com

I was looking to see if anyone could provide a good photo or how they should route and look. I think there is a common clip to hold them both together.

Correct heater hose routing - The 1947 - 67-72 Chevy Trucks

That hose (from the intake manifold) should always be connected to the bottom of the heater core. As the coolant flows into the core it fills it ...

Heater hose routing?? - Third Generation F-Body Message Boards

Run the 3/4" hose from the heater core to the water pump, and the 5/8" hose goes from the heater core to the shutoff valve and then to the ...

Heater Core Hose routing | Chevy Silverado and GMC Sierra Forum

Heater Core Hose routing ... So i just picked up a 2005 gmc 1500 sierra 5.3l the truck has every small common issue wrong with it. The previous ...

Heater hose /tube routing question | ClassicBroncos.com Forum

I am looking for ideas for routing the heater hoses and thinking about a cleaner way to route them rather than the stock hoses off the wheel ...

Heater hose routing - LS1TECH - Camaro and Firebird Forum ...

Conversions & Swaps - Heater hose routing - I have two ports coming out of the side of the LS1 water pump. One is larger than the other.

Heater Hose routing question on a 66 - Vintage Mustang Forums

What is the correct heater hose routing? Does the top hose (as viewed from the front of the car and coming out of the heater core) go to the ...

Heater core hose routing - E46 Fanatics Forum

Hey guys, quick question.. was replacing those 4 thin heater hoses, 2 for heater core and the 2 going to expansion tank. Well lack of food and ...

Heater core replacement - right core - correct hose routing?

" what happen to your original core? how did it fail is my question. just did one last year. I screwed up and installed my hoses backwards. on ...

Heater hose routing??? - Team Chevelle

If there was ever a problem, the larger return hose keeps the pressure down in your heater core. Reversing the hoses means you are providing ...

Heater hose routeing ( routing? )\Test heater Core? | S-10 Forum

So I guess I have 2 questions..... 1. Is there a way to check if the heater core is bad? Ive read on here about flushing it which I plan to try ...

heater hose routing question - MonteCarloSS.com Message Board

yup, you could install a 'T' in the upper radiator hose and use hat as the return from the heater core........or you could drill and tap the ...

Dodge Journey heater core/hose routing/flushing question

Dodge Journey - Dodge Journey heater core/hose routing/flushing question - The girlfriends heater core is plugged up, 09 Journey SXT 3.5 ...

1970 Heater hose routing question - NastyZ28.com

Heater hoses are run past the alternator over to the inner wheel well. There should be a metal strap on the wheel well that holds both of the heater hoses.

Heater core water hose routing - The 1947 - 67-72 Chevy Trucks

My heater core hoses go like this...from the intake manfiold to the upper heater core connection...then from the bottom heater core ...

Heater Hoses Which Way? | Team Camaro Tech

The hose from the outlet fitting (manifold) always goes to the bottom heater core fitting, and the hose from the inlet fitting (water pump) ...

Heater Hose Routing - Engine Tech

As far as the heater hose ports that go to the heater core, just cap them off at the engine. It's always a good idea to keep the heater intact, ...

help - heater hose routing - Jeep Forum

I printed that flow diagram yesterday. I understand TO / FROM Heater Core. The real question is which line (TO or FROM) goes to which inlet/ ...