Heater hose routing??

Comments43 ; Installing a Long Tube Heater Core. Andy Kruse · 5.4K views ; Proper heater hose routing and bypass valve, no more hot cab!!

That is the reason that the inlet to the heater core is supplied from the inlet manifold. That hose (from the intake manifold) should always be ...

The short elbow shaped bypass hose goes to the upper nipple on the water pump. The heater hose is attached to the lower nipple and goes to the ...

The 80/800's do not have a cable running to the cab interior to control the coolant flow. On those older Scouts, you must open the valve under ...

The hot water plumbing is connected to a nipple on the passenger side/rear of the intake manifold, goes through the temperature control valve, ...

Conversions & Swaps - Heater hose routing - I have two ports coming out of the side of the LS1 water pump. One is larger than the other.

Most of the time it's standard Chevy water hose routing... One hose from the outlet of the water pump to the core, the other to the intake ...

Ranchero & 1961 - 1967 Econoline - Heater hose routing - Does anyone have the correct routing diagram for the heater hoses in a 63 Econoline ...

Origin of this advert? r/240sx - Origin of this advert?

The 3/4" line returns coolant to the water pump from the heater core. The valve flow direction may make a difference in how effective the valve ...

Bronco Guru ... The upper hose is attached to the tubing elbow right on top of the intake. So it's pretty solid there. Then it lays in a curved ...

You must log in or register to reply here.

G'day task65, Normally heater hose outlet is at the manifold near the thermostat, and return back into the water pump somewhere near the bottom ...

You need the bypass hose at the spot where you have the two fittings installed already. I can see there's a pretty big mis-match as to how they' ...

Oops! We ran into some problems. Please try again later. More error details may be in the browser console.

this help? at heater core lower is inlet- to heater core upper is outlet - from heater core ...

The rear three hoses are secured to a three level plastic bracket that is wedged between the chassis and DME shield. On the bottom should be the ...

The heater outlet hose is routed from the top heater core tube to the water pump inlet via the choke retainer. In fact my friend, who has a ...

what is that? 1991, fresh 5.0, OBA, 6 inch lift, 9 inch rear, 5.13 ...

Bottom line, Hose #1--Thermostat to intake manifold, Hose #2--Intake manifold to heater core, Hose #3--Heater core to water pump. The pic I'm ...