Heater hoses routing

You've got a 50 / 50 shot at which heater hose goes where.. Does it really matter? Yup. http://www.OperationMustang.com.

heater hose routing - BinderPlanet.com

One hose comes off a nipple at the top of the waterpump. This is the return hose. The other off a nipple at the left rear corner of the intake mani.

Heater core hose routing | Ford Muscle Cars Tech Forum

The short elbow shaped bypass hose goes to the upper nipple on the water pump. The heater hose is attached to the lower nipple and goes to the ...

Heater hose routing - LS1TECH - Camaro and Firebird Forum ...

Conversions & Swaps - Heater hose routing - I have two ports coming out of the side of the LS1 water pump. One is larger than the other.

Heater Hose Route? | IH PARTS AMERICA

The hot water plumbing is connected to a nipple on the passenger side/rear of the intake manifold, goes through the temperature control valve, ...

Heater core routing of hoses... - Third Generation F-Body Message ...

You just need to run a hose from the water passage in the intake to the heater core, and then a return from the core to the radiator or water pump.

Heater hose routing - Ford Truck Enthusiasts Forums

Ranchero & 1961 - 1967 Econoline - Heater hose routing - Does anyone have the correct routing diagram for the heater hoses in a 63 Econoline ...

Correct heater hose routing - The 1947 - 67-72 Chevy Trucks

Most all hose connections on the water pump are INLET connections, meaning water is supposed to flow IN to them, not out.

Heater core hose routing : r/240sx - Reddit

I've got the 90 fitting off the block going to the upper port of the heater core and the fitting off the manifold going to the lower port. Is this correct or ...

heater hose routing - Firebird Nation

The correct routing for the heater core hoses, I have one that goes to the water pump and sits in a steel bracket on the engine, the other is looped and into ...

Heater hose /tube routing question | ClassicBroncos.com Forum

Glad it worked out for you... Doug.

Heater hose routing | For B Bodies Only Classic Mopar Forum

You must log in or register to reply here.

Heater Hose Routing - Engine Tech

You need the bypass hose at the spot where you have the two fittings installed already. I can see there's a pretty big mis-match as to how they' ...

heater hose routing - Hot Rod Forum

Normally heater hose outlet is at the manifold near the thermostat, and return back into the water pump somewhere near the bottom radiator hose.

help - heater hose routing - Jeep Forum

I'd like to double check the heater hose arrangment. The top nipple on the heater cores connects to the lower water pump nipple - correct.

What is a good clean way of routing the heater hoses for 1965-1968 ...

Of course where I live, all of the 1/4” plugs were out, so I used a threaded barb fitting and a cap. The foxbody heater tubes are 5/8” and 3/4”.

Can someone please verify routing of heater hoses?

They look right, but check the routings and see which fits where it's supposed to. I recall they all snapped into clips perfectly, so if you're forcing ...

Heater hose routing??? - Team Chevelle

The larger return hose keeps the pressure down in your heater core. Reversing the hoses means you are providing more coolant to the core than it can get rid of.

Heater Hose routing? - 1978-1988 GM A/G-Body Community

The hoses are 5/8" for the pressure and 3/4" for the return. The heater valve goes in the pressure line. The fittings on the engine and water pump and heater ...

Heater hose routing - Concours Mustang Forum

I am redoing the under hood area on my 1966 Sprint with air. I have replaced the heater hoses and looking for a picture with the proper routing for the hoses.