I have a trailer that the right hand brake light/ turn signal is not ...

Right Turn Signal and Brake Light Not Working - etrailer.com

It sounds like you either have a blown fuse or a short on the right side turn light and brake light circuit. First, I recommend checking the trailer wire ...

It could be a filament in the bulb is broken, it could be a problem in the light fixture itself, it could be an issue in the trailer wiring, it ...

Troubleshooting Right Side Turn Signal Not Working On Trailer

The most likely cause for the turn signals not to work when the running lights are on with your trailer is a bad or weak ground. It's very ...

Right turn signal and right brake light not working

Gary, first make sure the right brake/turn is working on your truck. Then, use a volt meter at the trailer bulb socket, verify you have voltage ...

Brake and turn signal on right side of trailer doesn't work ... - Reddit

no I just have my left turn signal on, as well as the running lights. The right turn signal works on the car, but not the trailer. Upvote 1

Trailer light problem with right turn signal and brake light on same side

Trailer lights... I'd say first check the bulbs, but more than likely you will probably find it is a ground issue somewhere. You just have to ...

Brake/turn signal lights don't work, running light... - 2794309

Just replace the bulbs.. Cheap and if that does not fix it, start checking ground wires.. That's usually the next easy thing to fix.. I once had a trailer where ...

Trailer running lights but no trailer brake or turn signals

Check your fuses. There are separate fuses that power the left and rt turn signal and brake lights. I just went through this with my trailers.

Troubleshoot Trailer Wiring - Left Signal and Brake Lights Not Working

This is a practical approach to troubleshoot any electrical wiring problem with a trailer. The diagnostics start with an inspection of the ...

Why do my trailer lights work but not my blinkers or break lights?

If you're looking for helpful and detailed product videos, you're in the right spot. Sharing the most in-depth information on the products ...

No right turn signal or brake light. - Grand Design RV Forum

If so, disconnect the trailer and check at the plug. Do you have power at the proper terminals? If so, open up the trailer light and see if you ...

Trailer Brake/Turn Signal Lights Do Not Work, Running...

I had a 2007 and the wiring harnes was linked to the rear tail lights. Try pulling the tail light, left side and check the ground connection ...

Brake light and right turn signal - Forest River Forums

Rushmore to Sioux Falls. It turns out my problem was that there was a little bit of sand in my electrical plug from the trailer to the tow ...

Right blinker and brake light not working | PopUpPortal

You may need to drill the heads off of the rivets to get to the wiring inside the wall. It may be a bad connection where the brake/turn wire ...

Passenger side trailer brake/turn signals not working

Check the trailer fuses in the power box under the hood. I think there is one for each the left and the right side. Jordan.

No Turn Signals or Brake Lights on Trailer - Jayco RV Owners Forum

If it was indeed a ground issue, the taillights would be out too. You can run a separate ground wire to the socket to verify that. I'd check the ...

Right brake light dont work on trailer | Chevy Colorado & GMC Canyon

Check the fuses. Not looking at the owner's manual at this moment, but my memory is there are several fuses involved for trailer wiring. Don't ...

#241: Trailer Turn Signal Not Working - YouTube

Our Car Mate 6x12 enclosed trailer turn signal is not working. Thankfully, someone let us know that the left turn signal wasn't flashing.

Right side trailer brake light and turn signal do not work!!

That one fuselink relay is the only one for the Right Brake/Signal so you'll want to confirm there's power to the hitch plug, it's the Green wire.

drivers side brake light on trailer doesn't work - GMTNation

I am currently having this same issue, my view on this is that if I have right turn signal, shouldn't be a wiring problem since it is the same ...