I hear a knocking sound coming from my 97 mustang cobra.So i ...
Not Good..Engine Knock on my 97 SVT Cobra - Corral.net
Its my experience spun bearings usually make a clicky sound as well... I know its difficult to determine, but you really have to find out if its ...
I hear a knocking sound coming from my 97 mustang cobra.So i ...
If so I strongly recommend a borescope inspection or manual compression test to make sure that the piston is not damaged. Some times you can get ...
1997 Mustang Cobra engine noise.
If it sounds like the noise is coming from the valve area, then it is a head/valve issue. I am not a professional mechanic, but cobras are known ...
4.6 cobra engine knock - Mustang Forums at StangNet
I guess I meant to say more of a rod knock sound, But when i said piston slap I was refering too a worn bearing or if the bolts where comming ...
Ticking Noise on 97 cobra | Mustang and Ford Performance Forums
If it is the sound I'm thinking of it is likely a lash adjuster (cam follower). My car has done this. It is easy to fix if it is. Run a quart of ...
97 cobra engine ticking noise | SVTPerformance.com
Clogged injector? Check your fuel filter, fuel injectors, fuel pump. Where's the gas smell from? Where's the ticking - knocking sound coming ...
Motor knock - 4.6 32v 1997 cobra | Mustang Forums at StangNet
If the noise is definitely at the top end then pull the associated valve cover off and start sniffing around. Perhaps you've just got a ...
Broken Timing Chain Guide on 97 Mustang Cobra - YouTube
Made a unfortunate discovery after developing a knock/rattle from a day of hard driving. To Support Karz Kreated, It Helps TREMENDOUSLY to ...
Knocking sound - MustangForums.com
... knocking sound would sound like since i took my 97 turbo cobra to the dyno and it was very rich and they said to add a couple more pounds ...
97 cobra bad engine noise??? - MustangForums.com
it sounds head related, not deep enough to be a rod knock. Im coming from the import world so this v8 stuff is all new to me. i checked all ...
Part 1 Your Sn95 4.6L SVT cobra has a knock, what do you do?
I decided to make a video about the knock my cobra has because most of the videos on Youtube about mustangs having a knock either don't give ...
97 Cobra motor knocking. - Mustang Boards
Modular 4.6L Tech - 97 Cobra motor knocking. - Started the Cobra not to long ago and it starting making this sound like hitting a Ball point ...
Engine Knock | Modded Mustang Forums
You may have a bad rod or main bearing. Probably rod. This won't cause it to run bad, as it doesn't really affect the fuel or ignition system...
Knock noise at startup : r/Mustang - Reddit
Try starting it in neutral, see if it makes the same noise. Seems to me like your shift linkage is out of adjustment and it's close enough to ...
Knocking Noise 2000-2100 RPM - Modded Mustangs
Sounds like a rod knock to me, disconnect coils on the suspect side one by one as you rev, if the noise stops with one disconnected, you have found the ...
Help Identifying This Knocking Noise - Mustang6G.com
The dull thudding, knocking sound seems to be related to the A/C and stretchy belt which is fixed with the tensioner kit for the A/C but apparently causes no ...
4.6 Cobra motor ticking noise???? Help! - DFW Mustang Forums
I had that noise right before I spun a bearing. But mine only happened at startup and went away a minute or two later. Turned out to be low oil.
4.6 Knocking sound at idle on cold start? - Ford Mustang Forums
Almost sounds like a rod knock....that goes away when warmed up. Not too loud, but there. I googled this, and seems like this happens to many ford modular motors.
sounds like a rod bearing to me. that is what mine sounded like when i threw a rod bearing.
2002 Ford Mustang GT 4.6L Knocking Sound : r/Cartalk - Reddit
Timing chain tensioner or guide. They're plastic and can hit the timing cover at random times causing the knocking sound.