Events2Join

If a mechanic tells you he needs to change your ball joints and tie ...


If a mechanic tells you he needs to change your ball joints and tie ...

You change the ball joints when they wear to the point where there is play or movement in them. If they are defective, tire wear will be poor ...

Mechanic says i need to replace ball joint (info in description) - Reddit

Ball joints can cause play side to side. Lay your finger across it and wiggle the tire, youll feel the play.

Do my ball joints need to be replaced? - Car Talk Community

A mechanic that tells you your ball joint are bad should be able to demonstrate the play in them to you. I had a mechanic at a local tire chain ...

Should I replace the ball joints or the tie rods first?

Really, if you need to do both, neither is better to do first. Safety wise, the tie rod ends would be better to do first, then the ball joints, ...

Should I replace my balljoints? When do they need ... - YouTube

When do ball joints need replaced? Most manufacturers state it as zero perceptible movement in the joints. If not properly checked you might ...

Is our mechanic trying to replace what doesn't need replaced?

The fact is that cars do wear out suspension parts. Ball joints, tie rod ends, sway links and bushings are common things that wear out around ...

i am having SYMPTOMS of BAD LOWER BALL JOINTS.MY ...

If it is within specs, then despite what the mechanic is saying, the balljoint is bad and needs to be replaced. For there to be movement in it, ...

Why It's Unsafe To Drive With Bad Ball Joints - YouTube

... it would be advised to have a professional technician handle the situation ... If you are not confident that your vehicle is safe to drive ...

Ball joint replacement - just lower or upper and lower?

Some ball joints may never need replacement. If you have your alignment checked every two years, you should get good warning about worn out ...

My mechanic says lower front ball joint is loose

I personally would replace both ball joints if I'm already in there and one is worn out...I'd just a s soon do it once and know both sides are ...

How to Check if a Ball Joint is Bad - YouTube

... you how to tell if it is a bad tie rod, bushings, or a bad bearing just in case your ball joint is not bad. A bad ball joint will make noise ...

Mechanic says I need... what???

Welcome to the world of owning a vehicle my friend. There is upper and lower ball joints. So that's 2 per side. You can get the parts your self ...

Repairing tie rods in pair necessary? - EricTheCarGuy

For ball joints and tie rods, they pretty much go when they go. There isn't much you can do about it. If you're having your mechanic do it, I'd ...

Q: A mechanic says I need tie rods, gave weird estimate I think

I can short circuit all of this for you, though: you can request tie rod end inspection/replacement for your vehicle. A certified mechanic will ...

How to Diagnose and Replace a Bad Ball Joint - YouTube

In this video I will go over symptoms of a bad ball joint like clunking, rattling, popping or squeking but also how you can remove and ...

Worn ball joints? Here's how to check - MOOG Parts

This means that if you have a problem with your ball joint, the entire assembly will usually need to be replaced. Depending on the type of suspension, most cars ...

Mechanic Advice | Do these ball joints look bad - Facebook

It is impossible to tell what the condition of the ball joint is, just by looking at this picture. There are indicators that there may be ...

How To Check and Replace a Bad Tie Rod ~ Clunk While Turning

Today we are replacing a bad tie rods. If you have a clunk while driving or a clunk while turning, it may be a bad tie rod. How to tell if ...

How big of a job to replace tie rod and ball joint? - Ford Fusion Forum

On my last trip to the service department they informed me that I will soon need to replace the front left tie-rod and lower left ball joint ...

Are the tie rods part of doing an alignment on a car? - JustAnswer

While play in the outer tie rod's ball joint is not good, technically they do not need to touch it while doing an alignment. A great repair shop ...