Investigation of the effect of a bend on pipe inspection using ...

One of our earlier studies proved that microwave NDT is applicable to the bent pipe inspection [19], by detecting the pipe wall thinning in bent pipes. However, ...

This study investigated the effect of a bend on microwave NDT (non-destructive testing) applied for rapid pipe inspections.

Investigation of the effect of a bend on pipe inspection using ... - CORE

http://creativecommons.org/licenses/by‑nc‑nd/3.0/deed.ja. Page 2. 1. Title: Investigation of the Effect of a Bend on Pipe Inspection Using Microwave NDT.

Title: Investigation of the Effect of a Bend on Pipe Inspection Using ...

Investigation of the Effect of a Bend on Pipe Inspection Using Microwave NDT. Authors: Guanren Chen*, Takuya Katagiri, Haicheng Song, Noritaka Yusa ...

Investigation of the Effect of a Bend on Pipe Inspection Using ...

The results showed that the presence of a bend led to a decrease in the reflection signal behind the bend, and the extent of decrease also depended on r/D and α ...

Investigation of the effect of a bend on pipe inspection using ...

Semantic Scholar extracted view of "Investigation of the effect of a bend on pipe inspection using microwave NDT" by Guanren Chen et al.

The investigation of guided wave propagation around a pipe bend ...

The analytical model can be used to both predict the effects of pipe bends on a range of signals and undo the distortion caused by pipe bends. Examples of this ...

Parametric Study of Defect Detection in Pipes with Bend Using ...

The propagation behaviour of guided ultrasonic waves in a steel pipe with welded bend is studied by finite element simulation. The effectiveness of the ...

Long-range inspection of a pipe with a bend using microwaves

This study evaluated the effect of bends on the long-range nondestructive testing inspection of pipe surfaces based on microwaves propagating inside the ...

Long-range inspection of a pipe with a bend using microwaves

Abstract. This study evaluated the effect of bends on the long-range nondestructive testing inspection of pipe surfaces based.

Investigation of Debonding Effect in Internal Replacement Pipe ...

The present study evaluates the impact of adhesion between the host pipe and the IRP, with a focus on assessing the debonding effect on the behavior of the ...

Inspection of pipe networks containing bends using long range ...

Some authors have investigated the effects experimentally(2), including Rose et al who have used a tuning concept to study the sensitivity of guided waves to ...

Defects detection in typical positions of bend pipes using low ...

In order to analyze the possibility of detecting defects in bend pipe using low-frequency ultrasonic guided wave, the propagation of T(0,1) ...

Traction Amplified Actuation System for Inspecting Narrow and ...

... Pipes Using Enhanced Linear Antagonistic Mechanism-Bend Pipe Passage Model and Force Comparison ... Many types of pipe inspection robots using ...

Failure pressure prediction of high-strength steel pipe bend ...

The findings reveal that increasing the bend angle reduces failure pressures significantly, with corrosion defects exacerbating this effect.

Influence of thermal expansion bend and tubesheet geometry on ...

36. Ni J, Zhou S, Zhang P, et al. Effect of pipe bend configuration on guided waves-based defects detection: an experimental study.

A Novel Feature Identification Method of Pipeline In-Line Inspected ...

In addition, the main component of the pipeline bending strain in-line inspection system is the inertial measurement unit (IMU), which is based ...

The investigation of guided wave propagation around a pipe bend ...

2022. The feasibility of a new approach for pipe inspection has been explored using digital twins to enhance guided wave inspection. Guided wave inspection is ...

The investigation of guided wave propagation around a pipe bend ...

The analytical model can be used to both predict the effects of pipe bends on a range of signals and undo the distortion caused by pipe bends.

Investigation of Smooth Pipe Bends Under the Effect of In-Plane ...

ABAQUS FEA software is used in this study to model pipe bends with different nominal pipe sizes, bend angles, and various bend radius to cross- ...