MSDOS through serial port

DOS through the serial port using the CTTY command - Reddit

On the DOS side use CTTY COM1, or whatever serial port you are going to use. Before doing it though, try doing something simple like "COPY ...

How do I connect a command prompt to a serial line in MS-DOS 6.22?

@davidbak I remember it as the command you would have to manually type in to install Interlnk and Intersvr, which would allow you to connect ...

Serial Programming/DOS Programming - Wikibooks, open books for ...

It is now time to build on everything that has been established so far. While it is unlikely that you are going to be using MS-DOS for a major application, ...

serial terminal as monitor on ms-dos?

Yes, it is possible. Connect a terminal, configure it using the MODE command, and then type CTTY COM1 (or whatever port it is on) to transfer control to it.

MSDOS through serial port - Google Groups

Does anyone remember the MSDOS command to run the console through the serial port. I thought there was one, but can't remember it. I am using MS-DOS 6.22

Serial programming in C , in DOS - Stack Overflow

I need to do some basic serial programming in C, in old 16-bits MS-DOS. I know the basics, i had coded some serial comm. in some microcontroller some decades ...

Transfer file via Serial with DOS - VOGONS

Yes on an old PC the defacto method for transferring files was laplink or intersrv over parallel or serial. Since those ports are non-existant on new computers.

Serial Port use in MS DOS mode. - Support - Dynabook

2.1 From Windows 9X, accessing DOS from MS-DOS Prompt or setting up a shortcut to MS-DOS. However, if the machine is shutdown from Windows 9X in to MS-DOS mode ...

Booting an MS-DOS PC Over Serial with XTIDE! (Setup Guide and ...

Join us as we demonstrate how to boot up a "real" and "virtual" retro computer over a serial connection!

The Serial Ports - COM X - UMBC

MS-DOS support two basic communications ports - COM1 and COM2. Their base addresses are stored in the BIOS data area at 0040:0000h (COM1) and 0040:0002h (COM2).

A serial port / UART library for DOS - GitHub

A serial port (UART) library for DOS written back in the days when 16-bit systems were still a going concern and far pointers were a thing.

Testing Communications from MS-DOS - Microsoft Support

When you troubleshoot communications problems in Windows, an MS-DOS-level communications program is often required to test the modem and ports outside of ...

Reliable MS-DOS Serial Communication Under Windows - WCSC

Many MSDOS serial communication applications can be made to work reliably under Windows XP, Windows 2003, Windows 2000, and Windows NT with our high speed ...

serial communication - two PC's (Win 8 & DOS) | Forum for Electronics

Hi i have two pc ; one is MS-Dos and other has windows 8 i want to communicate them with serial port , like send and receive .txt file ...

How to read serial port data in DOS environment - Stack Overflow

DOS called the serial port the COM port. Unfortunately you cannot use it as a file name in C like in Linux, while in the DOS prompt you can use COM1 to access ...

Thread: Using serial port in dos application

I need to use an old dos program running in a dos window. This program use the 2 serial port com1 and com2 for signals from instruments but ...

DOS Serial Communication

The most convenient way to do serial communication is by including the Borland header file bios.h and use the command _bios_serialcom or bioscom (less #defines ...

MS-DOS File Transfer Using Serial to WiFi Modems and ZModem

Join us as we have a look at two different revisions of the RS-232 to WiFi modems as produced by The Old Net and then perform a ZModem file ...

How can I write a MS DOS program for serial communication with a ...

Hi and thanks for your help I have a table in Excel spreadsheet which is containing data to motor through a stepper driver I can convert ...

Access com3 & Com4 in DOS - freebasic.net

Under dos there are "device drivers" that allow to use a device on a virtual COM port, too. I remember that I had an old ISA modem, and I ...