No sound input from cassette player to computer

Set the default recording device to the line in, press the record button in the program. http://windows.microsoft.com/en- ...

I have no sound in PC speakers from a cassette player by USB

If you want to hear cassettes without recording, click in the Recording Meter where it says “Click to start monitoring”, as well as enabling ...

No input audio on cassette deck? : r/cassetteculture - Reddit

If still no luck it could be a dirty play/rec switch inside the deck. Upvote

No sound and can't record using USB tape player - Audacity Forum

You can also check line-in on your soundcard if you have “something else” like a DVD or CD player with analog outputs (and the correct adapter ...

Trying to record from cassette player to Audacity on laptop, using ...

Your cassette player is low-impedance speaker-level out, TRS, stereo. Your computer is high-impedance mic-level input, TRRS, mono. Even if you ...

No sound input when using ION usb Tape to PC deck - Forums

I have connected an ION usb tape to PC tape deck and configured Sound input in preferences to usb codec input works fine.

Tips to Record Cassette Tapes to Computer | ScanCafe

In order to record the audio from the cassette tape to your computer, connect the male RCA side of the cable (red and white) into the female RCA connectors on ...

How to copy Cassette to MP3 - to your laptop. - YouTube

... tape whilst recording WITHOUT altering any Windows sound properties. There was also nothing said about altering microphone input gain before ...

Cassette turns but no sound | Tapeheads.net

You might be looking at a bad capacitor which seems to be the most common issue that I run across. The tape doesn't amplify, so I'd look at the ...

Suddenly no sound output from cassette deck - AudioKarma

Pay special attention to the mode switch. When you pop the top on your deck, look for the a big long switch on the main PC board that is ...

Cassette deck input to computer - Sound Design Stack Exchange

Play cassette, record using Audacity. Quality is very bad. Have reduced input volume (Audacity) with no luck. Tape deck has no balance dials to ...

cassette to macbook pro, tape deck not re… - Apple Community

Use the headphone jack out of the cassette player to the audio in port. That would be male-male connection. You don't mention what macOS is ...

Troubleshooting Your TEAC Cassette Deck: No Sound Issues and ...

Customer: My TEAC cassette deck is playing without producing sound. The charts indicate that the deck should produce volume.

How can I transfer cassette tapes to my computer? - Quora

If you mean an audio tape then you connect the output from the tape recorder to the audio input on a computer. So that's the tape player ...

Recognising input device - Microsoft Community

If your cassette player has an 'Aux Out' jack, you can connect it directly to the 'Aux In' jack of your computer with an analog (green tip on ...

i can't record from my cassette deck for some reason - GoldWave Inc.

There are several possible solutions, but the simplest is to connect the tape deck's output directly to the sound card's line input. Another ...

Not recording. - Tapeheads.net

To recording from computer to cassette deck, this cable must be connected to phones out (at computer) to rec input on the cassette deck.

no sound from tape deck when connected to my mac

The simplest way is from the headphone socket on the cassette deck to the phono input on the back of the Mac. The line level should be OK.

How to transfer sounds from a tape recorder into the PC

Take care that the recording level of the audio input device is adjusted correctly. This is the same matter as the recording level adjustment on your tape ...

How to Transfer Cassette Tape to Computer (with Pictures) - wikiHow

To record your cassette audio on your computer, you will need to connect your cassette player to your computer's microphone (or "line-in") port.