Nurse Tank Testing Update

Nurse Tank Safety Advisory | FMCSA - Department of Transportation

The current Hazardous Materials Regulations (49 CFR Parts 171-180) do not require periodic inspection and testing of nurse tanks that have attached and legible ...

Any nurse tank testing procedure is likely to impose additional costs on agricultural operations that use nurse tanks to inject nitrogen ...

Nurse Tank Testing Update - CropLife

Consequently, a committee was assembled by TFI and an exemption was requested and approved to continue the use of these tanks. The Nurse Tank Inspection Program ...

3 Things To Know About Testing And Repairing Nurse Tanks

Following the nurse tank safety advisory issued earlier this year, you may find yourself needing to perform additional testing and repairs ...

Hazmat Safety Advisory: Nurse Tank Launched 300 Feet

Safety Advisory: Possible Catastrophic Failure of Nurse Tanks and Recommendation for Periodic Testing, 2/20/24. The Agencies strongly recommend ...

Federal safety advisory issued for American Welding and Tank ...

The parent company of the farm co-op subsequently conducted similar radiographic testing on 142 AWT nurse tanks manufactured between 2007 and ...

Testing and Recommended Practices to Improve Nurse Tank Safety

2 Performed visual and angle-beam ultrasound testing of donated tanks. External visual inspection of the pinhole leaks showed a small patch of rust and spalling ...

Anhydrous ammonia nurse tank owners urged to check ...

UPDATE 4/19/24 - Only tanks with serial numbers starting with a 6 need to be tested. BISMARCK, N.D. – Anhydrous ammonia nurse tank owners ...

DOT warns of potential 'nurse tank' failures - Trailer Body Builders

Current Hazardous Materials Regulations (49 CFR Parts 171-180) don't necessitate periodic inspection and testing of nurse tanks with attached ...

H-04-023 - NTSB

TO THE PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION (ORIGINALLY ISSUED TO RSPA): Require periodic nondestructive testing to be conducted on nurse ...

Testing and Recommended Practices to Improve Nurse Tank Safety

A selection of agricultural anhydrous ammonia nurse tanks was examined using phased array (PA) ultrasonic technology and acoustic emission (AE) monitoring.

Safety advisory on older nurse tanks - JJ Keller

During the summer of 2023, a 2009 AWT nurse tank carrying anhydrous ammonia had a catastrophic failure, releasing all of the product and “ ...

Safety Agencies Issue Anhydrous Ammonia Nurse Tank Advisory

According to the FMCSA, the current Hazardous Materials Regulations do not require periodic inspection and testing of nurse tanks that have ...

Anhydrous tanks require farmers' full attention | The Western Producer

The FMCSA and U.S. Pipeline and the Hazardous Materials Safety Administration is now strongly advising anyone with an AWT nurse tank ...

Nurse Tank Inspection Program (NTIP) Public Page - Asmark Institute

A nurse tank inspection is made up of 3 parts: Pressure Test 180.407 (g) · Thickness Test 180.407 (i) · Visual Inspection 180.407 (g).

Anhydrous ammonia tank failure spurs safety advisory

The advisory warns that nurse tanks manufactured by American Welding and Tank between 2007 and 2011 “that are exempted from periodic inspection ...

Ammonia | Illinois Fertilizer & Chemical Association

Click on "CT Inspection Facilities" to view CT facilities that are certified to perform testing for the Nurse Tank Inspection Program. ... Is It Time To Update ...

Check for defective anhydrous ammonia nurse tanks - Jamestown Sun

Owners of affected tanks are strongly encouraged to arrange for a nurse tank inspection conducted by a certified cargo tank inspector in ...

Testing and Recommended Practices to Improve Nurse Tank Safety ...

Testing and Recommended Practices to Improve Nurse Tank. Safety, Phase III. This brief documents findings from the third phase of a multi-year research effort ...

Nurse Tank Anatomy | Minnesota Department of Agriculture

All valves and gauges will be located on the top of the nurse tank and toward the front except for the pressure relief valve. The valves and gauges will be ...