Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

This paper presents a two-phase experimental campaign: the Taguchi method followed by the Box–Behnken design of experiments (DoE), to optimize ...

Correction to: Optimizing Cold Spray Parameters for High Entropy Alloy Coatings Using Taguchi and Box–Behnken Design Approaches for Mechanically ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

The present study focused on optimizing the cold spray (CS) process parameters for depositing Fe 20 Cr 20 Mn 20 Ni 20 Co 20 (Cantor alloy) ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

Abstract The present study focused on optimizing the cold spray (CS) process parameters for depositing Fe 20 Cr 20 Mn 20 Ni 20 Co 20 (Cantor alloy) coatings ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

Abstract. The present study focused on optimizing the cold spray (CS) process parameters for depositing Fe20Cr20Mn20Ni20Co20 (Cantor alloy) coatings using ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

PDF | On Oct 21, 2024, Deepak Sharma and others published Correction to: Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

AbstractThe present study focused on optimizing the cold spray (CS) process parameters for depositing Fe 20 Cr 20 Mn 20 Ni 20 Co 20 (Cantor alloy) coatings ...

Optimizing Cold Spray Parameters for High Entropy Alloy Coatings ...

AbstractThe present study focused on optimizing the cold spray (CS) process parameters for depositing Fe20Cr20Mn20Ni20Co20 (Cantor alloy) ...

New Cold Spray Paper Published in Thermal Spray Journal - TWI

It focused on the optimisation of cold spray process parameters for depositing Fe20Cr20Mn20Ni20Co20 (Cantor alloy) coatings using mechanically ...

Cold Spray Paper Published in Thermal Spray Journal - Forge Project

It focuses on the optimisation of cold spray process parameters for depositing Fe20Cr20Mn20Ni20Co20 (Cantor alloy) coatings using mechanically alloyed powder.

Optimisation of process parameters for high entropy alloy coatings

The present study aims to optimise process parameters for depositing CoCrFeMnNi high entropy alloy (HEA) on carbon steel substrates via four coating ...

Ali Alperen Bakır on LinkedIn: Optimizing Cold Spray Parameters for ...

I'm pleased to share that our latest research article, titled "Optimizing Cold Spray Parameters for High Entropy Alloy Coatings Using ...

Spray parameters optimization, microstructure and corrosion ...

%) medium-entropy alloy (MEA) was designed, and the Cu-based MEA coating was deposited on the AISI 1020 steel substrate via high-velocity oxygen-fuel (HVOF) ...

Process optimisation of cold spray additive manufacturing of ...

Articles citing this one ... Optimizing Cold Spray Parameters for High Entropy Alloy Coatings Using... ... In-situ CrFeCoNi medium entropy alloying coating via ...

Significant improvement of mechanical properties of cold-spray ...

In this work, equimolar FeCoNiCrMn high-entropy alloy (HEA) was fabricated by solid-state cold spray additive manufacturing (CSAM) technique and post-annealed.

Optimization of cold spray process parameters to maximize ...

The paper considers the conducted study of the complex effect of low-pressure cold spraying parameters, namely the nozzle inlet temperature, stand-off distance ...

High-entropy Alloy Coatings Research Articles - R Discovery

Regarding the hardness, the cold sprayed coatings exhibit hardness in the range of 440–498 HV due to high work hardening and low oxygen content below 4 at.%; ...

High-Entropy Alloy Coatings Deposited by Thermal Spraying - MDPI

Thus far, air plasma spraying (APS), high-velocity oxy-fuel (HVOF), high-velocity air-fuel (HVAF), flame spraying (FS), and cold spraying (CS) was employed to ...

Machine Learning-Based Predictions of Porosity during Cold Spray ...

High entropy alloys (HEA) have been recently getting a lot of attention due to their attractive properties compared to conventional alloys [10,11]. The first ...

Microstructural Study of Cold-Sprayed CoCrFeNiMn High Entropy ...

4 Citations · Optimizing Cold Spray Parameters for High Entropy Alloy Coatings Using Taguchi and Box–Behnken Design Approaches for Mechanically Alloyed Powder.