Question about Hose routing with heater core bypassed

Well im just curious if ive had the cooling hoses routed correctly. When i decided to bypass the heater core/heating system itself i pulled all ...

Blue lines way: pulls hose from core and reconnects to motor/head. Not very good at finger drawing so if there are questions please ask and if ...

Instead of going from the water pump and intake manifold to the heater core, connect a hose from the water pump to the intake. This will bypass ...

One hose goes from the water pump to the tank, then out of the other tank tube with a new piece of hose to the heater core. The other nipple on ...

You don't need that much hose. Just run a loop from the fitting at the curb side head by the dipstick to the one at the top of the water pump.

I guess the first step would be to get plenty of towels for the footwells, and then introduce your garden hose to the heater core inlet/outlet ( ...

1979 Euro BMW 635CSi plumbing The two heater hoses spliced together with a barbed connector, thereby bypassing the core.Rob Siegel 1979 Euro ...

I picked up a heater core hose bypass valve for the always running heater core and blower motor issue in c10s from the factory. Re routed ...

The upper one goes from the waterpump to the thermostat housing (bypass hose) and the lower one goes to the heater core (right side I believe, ...

Preview image for a collapsed post. ... Remove that bypass hose and hook your hoses to heater core like below. Attachments. Engine Auto part ...

You will only have one heater hose running from the heater core back to the water pump. The other heater hose now takes a different route from ...

Chevy/GMC 6.2L and 6.5L - Coolant Bypass Hose / Heater Core Routing Questions - I have been trying to find out everything I can about the ...

Here is my situation: I will not be using and installing the heater hoses from the engine to the firewall. With that said, what is the new and ...

For a quick fix, I yanked a heater hose from the core, and routed it back on the motor. Motor is a ford 302, so one end of the hose is ...

I am looking for ideas for routing the heater hoses and thinking about a cleaner way to route them rather than the stock hoses off the wheel ...

It looks like there is another route, called the guy and told him to see if blocking off the heater hose would be a good idea and to let me know ...

Looks like it is bypassed with ahose for the coolant to recirc in the block. I have what I think is the correct hoses to flow through the heater ...

yup, you could install a 'T' in the upper radiator hose and use hat as the return from the heater core........or you could drill and tap the ...

To make a long question short, Heater hose runs from the heater core to the passenger side of the intake manifold. Other hose runs to the ...

Bypass hose or bypass : Is a built in leak to recirculate water till thermostat opens but the bypass percent of water is there all the time not ...