Events2Join

Quick fix for leaking tranny cooler fitting at radiator


Quick fix for leaking tranny cooler fitting at radiator

For a "quick fix", just pull both ends out of the radiator and loop them with some trans cooler rated hose. Its not ideal but can be done in a ...

What does fixing a leaky transmission cooler fitting typically consist of?

Of course you'll need a pail to catch the fluid. Once the fitting is out, carefully inspect the plastic for cracks. If the plastic isn't cracked ...

Transmission Cooler Quick Connector Leaking

It sounds like you are disconnecting the lines at the Transmission. You don't need to do that. Just disconnect at the Radiator, plug the end in ...

Help! Transmission Cooler line leaking? - YouTube

Are your transmission cooler lines leaking? This video is here to help you perform a quick, easy, and dirty repair to STOP them from leaking ...

How to fix tranny cooler line outlet fitting leak - Hot Rod Forum

The easy fix would be to get a new fitting from GM. I know that many replacement radiators come with the fittings so they might be available ...

New radiator installed - trans fluid leaking out the cooler line fittings.

I noted in one YT video that these fittings should be installed with PTFE thread tape, and to be sure the new radiator did come with two brand ...

New tranny cooler lines leak !!! | BobIsTheOilGuy

Use two wrenches so you don't disturb the fitting in the radiator. D ...

How To Fix Damaged Transmission Cooler Line (Andy's Garage

Andy Phillips shows how to repair damaged transmission cooler line where it connects to the radiator. Below are links to other videos of ...

How to fix leaking Transmission Cooler Lines quick and cheap

In this video I show you the steps involved to fix a leaking transmission cooler lines on your vehicle. These lines tend to start leaking ...

Transmission line to radiator leaking...advice - Chevy Tri Five Forum

Teflon tape only works on pipe thread. Most auto trans cooler fittings in a radiator tank are inverted flare. They seal because the flare on the ...

Radiator leaking coolant at a transmission fitting

The cooler is inside the tank of the radiator and the threads of the fitting seal the trans circuit and keep it separate from the coolant. It ...

Fixing Leaking Transmission Line Fittings at Radiator - JustAnswer

If it is a quick-disconnect style fitting, then the o-rings can be replaced. I would need a picture of the fitting to be sure. Also, have the ...

How I Fixed a Leaking Cooler Line for Free - YouTube

After my 2007 F150 developed a transmission fluid leak at a rusted cooler line, I used some extra rubber hose and hose clamps I had in my ...

Transmission cooling line leak at radiator from connection

Get an external trans cooler, have a couple longer hoses made and be done with it..... Thanks. Reactions: jrod5150 ...

A possible quick and cheap solution to the Crappy,leaky,oil and ...

I replaced my oil cooler lines with Doormans they started leaking just out of warranty. I used a pipe cutter and a pair of wire cutting pliers ...

Leaking transmission lines at radiator - Chevy Enthusiasts Forums

It may not be the correct way to stop the leak but if you are stuck with the radiator and have no other choice you can try something like JB ...

How to Find and Fix a Leaking Transmission Coolant Line - YouTube

Help! Transmission Cooler line leaking? Ben Sielaff · 1M views ; 2006-2011 Ford Fusion - Transmission Cooler Lines Leaking - Fixed - Quick/Easy - ...

HELP!! How to fix leaking trans line at Radiator?

DO NOT drive it like this. You may be able to patch it with a compression fitting or a piece of tubing and clamps temporarily. Your best bet is ...

Transmission Cooler line leaking at quick connect fitting

I had to use angled fittings at the radiator, clearance was so tight. I forget the size and threading, but go to a knowledgeable auto parts ...

Radiator leak around TrANS fittings | Ford Powerstroke Diesel Forum

I chased the cooler around trying to get it in place stuck something in lower hose hole behind it to hold in place to thread one side,tightened.