Removing heater hoses from firewall?

Easiest way to remove heater hoses - YouTube

Thanks for the tip! I just used the zip-tie trick on the firewall connection on my 2012 Expedition and it worked like a charm.

Heater hose removal at firewall - The Chrysler Minivan Fan Club

Simply take a sharp knife (box cutter, Xacto, etc.) and carefully cut the hoses from their edges (firewall side) along the length of the nipples.

heater hoses connection at the firewall - North American Motoring

You pull the keeper wire completely with small hook tool or screw driver. Then using something to grab fitting (channel locks) you just wiggle ...

How to remove heater hose from firewall. - Diesel Place

The plastic factory quick connect had to be cut to remove the hose and then clamp a new hose in place (Has a plastic retainer around it).

How to Remove Heater Core Inlet & Outlet Hose from Firewall ...

Take a set of pliers or channel locks, grab the hose where it fits over the connector and twist it to break the seal. Then the hose would pull right off.

1999, 5.3L LS - Heater hose removal Diffculty

Sometimes pushing it forward, towards the firewall, while pulling on the insert to seat it a bit more, then trying to pull it off helps. But ...

Heater hose removal simplified - MX-5 Miata Forum

I removed my heater hoses at the firewall using two sets of vice grip pliers. I used long nose vice grips to release the clips as per the photos attached.

How to remove a heater hose quick connect on a GM - YouTube

Want the tools and parts that I used in this video? Click on the amazon link below *** Automotive Quick Connect Tool- ...

Firewall heater hose junction coupling removal and installation ...

Firewall junction coupler replacement: 1 to 2 hours ($50 / $240 / $370) Heater core: https://www.youtube.com/watch?v=OdKzDfvOoQA In this ...

How to properly remove old heater hoses - DSMtuners.com

Take a razor blade and simply slit the heater hose at the firewall straight down the middle, pulling out and away from the heater core, then just PEEL the hose ...

Removing heater core lines from firewall? - SVTPerformance.com

I was able to remove my heater core lines by hand. Just push on the two gray tabs that are inside the rectangular shaped cutout on the 90 degree plastic piece.

heater hose won't come off firewall? - Honda-Tech

In my engine bay, I have plenty of room to remove both hoses after taking the intake off. I can fit pliers and everything there. Not sure why ...

HEATER HOSE REMOVAL - Ford Truck Enthusiasts Forums

WOW, what a real pain to remove them. I even had the U-shaped tool for removing the fitting but the connection is so close to the firewall it is ...

Bypass Heater Hose Firewall Coupling | 1997 Volvo 850 Wagon ...

Unfastened the firewall junction under the hood by removing the two screws holding it in place, observing orientation. Then prying the metal ...

Removing heater hoses from firewall? - Duramax Forum

There's a Lisle quick connect kit for a variety of fittings under the hood. It's about 10 bucks. The fittings are about 5 bucks each and the ...

How to Take Heater Hoses Off Like a BOSS !!! - YouTube

17:27 Go to channel How to remove GM 1999-2014 Heater hose inlet connector & replacement heater core Part # 15032062

Best way to remove heater hoses at firewall - Just Commodores

VL commodore heater hoses and they'll look up the computer/book for a match, then they'll order them in. Use some pliers too, come in handy if ...

240 - Heater Hose Removal - The Volvo Performance Community

It should be attached to a fitting at the firewall, as was stated. And yes, CAREFULLY cut the hoe after removing the clamp. Your aim here is not ...

Heater hose delete help - Team Chevelle

Yes, just remove the hoses and plug/cap the intake and radiator hose ports. ... Or you could do this so if you ever want heat or you sell the car ...

Heater hose connection on firewall - JK-Forum.com

Let us know how replacing those hoses went for you and if you had to remove anything else in the replacement process. Reaching those firewall ...