Events2Join

Replace 308 with 7|08


Replace 308 with 7-08 | The Stalking Directory

The 7-08 doesn`nt really bring any great advantages and ammo availability, if not a home loader, can be restrictive compared to 308.

Gunsmithing - Can a 308 be rebarreled to 7mm-08? - Sniper's Hide

I know a guy who fired 7mm-08 rounds down his 308 rifle, so yea, it can work - in many different ways. I do not recommend 7mm-08 rounds down a 308 tube.

Can you shoot a .308 Winchester out of a 7-08 Remington rifle?

Not safely. Most likely the 308 won't chamber in the 7mm-08 so you won't physically be able to do this even if you were stupid enough to try ...

7mm-08 vs 308 | Rokslide Forum

So if I kept the 308 I'd chop it to 18-20” to keep it compact (I use a suppressor). Now I know weight for weight the 7mm-08 will have a higher ...

Head to Head: .308 Winchester vs. 7mm-08 Remington

308 is the more popular of the two cartridges, based on the availability of surplus ammunition, and its military background. The 7mm-08 gives ...

Resizing brass from 308 to 7mm-08 - The Firing Line Forums

going by the specs the 7mm-08 sizer shouldn't touch the .308 case shoulder. I'd recommend making your first load a light plinker using it to ...

.308 case to 7mm 08 case? | Shooters' Forum

That is exactly how you would make a 7/08 out of a 308 case...the only difference is the neck size... Lube it up, be careful of putting to much ...

7mm 08 vs 308 Winchester: Which Is Better? - Field & Stream

With the right bullet, the 7mm-08 can perform better than the 308 Winchester at distance, but factory ammunition options allowing for this are limited. For most ...

7mm-08 vs .308 Caliber Comparison: A Long Range Shootout

In general, the 308 Winchester will fire heavier bullets than the smaller 7mm-08 Remington. Bullet weight has a direct correlation to felt recoil and there's no ...

7mm-08 Beats 308 Win! - Ron Spomer Outdoors

In a recent blog, manly man Richard Mann indulged in a weak embrace of the 308 Winchester as his choice for all-round, do-everything rifle cartridge. Like the ...

.308 to 7mm-08 | Long Range Hunting Forum

Shooting a 7-08 in your 308 will do no harm, just won't be that great for accuracy. A 308 cartridge will not fit in a 7-08 at all so the head ...

7mm-08 from 308 WIN - 24hourcampfire

I quickly replaced it with the next item on my bucket list, a 7mm-08 bolt gun. Things were tight. I grabbed 308 WIN brass and re-sized it ...

.308 to 7mm-08 | In-Depth Outdoors - In-Depth Outdoors

In theory, you can run a well-lubed .308 case directly through a 7-08 full length resizing die (in several stages) and you end up with…wait for ...

Is 7mm-08 just a better, more modern 308? : r/Firearms - Reddit

No.. it is a 308 with a 7mm bullet, and the neck adjusted approprately to that change. If I were going to get a modded 308 to a "better ...

308 vs 7m08 | The HuntingPA.com Outdoor Community

308 has been around a lot longer, and is a better woods round, with it being loaded with heavier bullets. 7mm 08 might have an edge on long range due to the BC ...

Can I turn my Rem 700 7mm-08 into a 308 with a barrel change or is ...

Depending on what you want to do with the rifle the 7mm-08 is a fine cartridge.

RESIZING .308 BRASS TO 7MM-08 ? | Shooters' Forum

The parent 308 has a slightly (0.020") shorter case than the 7-08 variant, hence a reformed 308 will always be on the short side initially. More ...

can you shoot a 7mm-08 in a 308? - Nodak Outdoors

The 7mm-08 and the 308 have different bullet sizes.The 7mm is smaller and could lead to disaster if you try this.Stick with the 308 ammo.

7mm-08 in a .308 Win? - Northeastshooters.com Forums

Hopefully someone else with brass sizing experience will chime in, but you are correct in thinking the cases are similar. In fact the 7mm-08 is ...

Dpms lr308 switching to 7mm-08 questions | Sniper's Hide Forum

The barrel is the only thing, with the caveats that lte82 mentioned. It's a cartridge based off the .308, with the only change being the neck ...