Events2Join

SK3 3542|800Kv testing MAS 9X7 3 Blade prop


SK3 3542-800Kv testing MAS 9X7 3 Blade prop - YouTube

Some preliminary testing on the SK3 3542 @800Kv. Other props were tested including 11X5.5E, 11X6E, 12X4 MAS, 12X6 MAS, 13X6X3 MAS... all ...

Turnigy SK3 3542 800kv Bench Test [The Judge Ep. 1] - YouTube

... This video puts a Turnigy SK3 3542 800kv on a test stand to find out what size prop to use and to measure power/thrust for the record.

Stephen Hanson - YouTube

Videos · Turnigy Aerodrive SK3 5045 500Kv MAS 13x8 3blade 6S · SK3 3542-800Kv testing MAS 9X7 3 Blade prop · Dragonfly eating a small bee.

Turnigy Aerodrive SK3 - 3542-1250kv Brushless Outrunner Motor

Is doing a good job running a 10x10e prop on 3S. ... Strong and durable ... Only one failure due to ground impact with over 50 SK3 motors installed and flying.

Best KV for a prop size chart - FliteTest Forum

Adding blades both helps and hurts this (just one more relationship). Quick search turned up APC and MAS's prop specs . . . but most of the ...

Question Turnigy Aerodrive SK3 3542 1000kv - RC Groups

I was wondering can anyone give me (or measure) the thrust data for the Aerodrive SK3 3542 1000kv @ 13x6 prop on 3S? ... Props tested are APC e- ...

3-Blade MAS prop test results (log analysis & video)

Motor PWM output only increased by 5-6%. This isn't exactly linear with RPM, but it shows that the 3-blade props do not need to spin faster, but ...

turnigy aerodrive 3542 1250 testing - Profile Brotherhood

I was using a 9x7 prop on 4s. Mounted the motor, programmed esc ... Upon closer inspection, 3 magnets had come loose and were rubbing.

Thread: Hacker A30-12L vs Turnigy SK3 3542-1000Kv -Head to ...

5 prop a current of 37.8A. ... Input Power: Once again, using 3S LiPo, none of the props tested required more than 500W of input power. The largest was the 13x6.5 ...

Testing a 3 Blade Prop - YouTube

It's supposedly common knowledge that 3 blade props produce less vibration than 2 blade props so I stole Owen's off the Chinook and I tried ...

Hacker A30-12L vs Turnigy SK3 3542-1000Kv - RCU Forums

Brushed/Brushless motors, speed controls, gear drives - Hacker A30-12L vs Turnigy SK3 3542-1000Kv -Head to Head PERFORMANCE TEST - ORIGINAL: ...