SMB access problem from two different ip classes

SMB access problem from two different ip classes - MikroTik - Forum

It may help to put other router config, but first, please, modify the masquerade rule and check to see if you reach the destination lan (192.168 ...

Noob question about SMB across subnets : r/HomeNetworking

SMB will pass across subnets just fine as long as the 2 networks can pass traffic and no firewall rules are blocking it.

Samba share across two subnets - Super User

The problem was with the firewall of our router/gateway which blocked the ports used by SMB (135 - 139 and 445). After our IT department opened ...

SMB on a NIC with multiple IP in same subnet - Server Fault

I have a Windows 2008 R2 server and set multiple IPs(same subnet) on a NIC. Now SMB service is binding on the lowest IP address as port 139, 455 are opened on ...

Two network cards: SMB (file share) connecting to wrong IP

Hi,. The situation: When a server is having two network cards, client tries to connect to secondary IP through gateway(firewall).

Two SMB shares only one accessible | TrueNAS Community

I can see both shares by going to the server \\ip\. One share I can access from Windows (any copy and machine in my network) and the other gives ...

Using multiple network interfaces (NICs) with Samba

The line "hosts allow" specifies which subnets the client computer needs to be on in order to have access to our Samba share. Let's say that my wi0 NIC has the ...

How multiple adapters on the same network are expected to behave

If a network application were to bind to the second adapter specifically, application-related traffic that was received from clients on the first adapter might ...

Can't access SMB share via SMB name but can access via IP.

I have a NAS with SMB share on a separate interface than my devices that have firewall rules setup to access it. There are NO issues with me ...

Routing SMB between subnets - Ubiquiti Community

2.0/24 network. My idea is to use two different IP ranges served by two DHCP servers but using a subnet mask that would allow the two networks to communicate ...

Sierra won't connect to more than one SMB server simultaneously

Sierra thinks an IP address is actually a hostname during SMB connection and is attempting to resolve it to an IP address, which is obviously unsuccessful.

Connect two computers with different class IP address - Networking

1.1), I want to share files in between both, how both will ping with each other and share files. What will be the settings in network adapter.

Windows routes all SMB traffic through Tailscale even when LAN IP ...

I'm having the same issues. I tried disabling NETBIOS entirely (in network settings) and still the network file share traffic routes through ...

Samba server share files across two subnets

You must use this option to force Samba to serve the other subnets on your network. It looks like your interfaces line in your smb.conf is ...

Samba across two subnets? - Home Assistant Community

So I have HA setup on two networks from two different routers. One uses 10.0.0.x IPv4 while the other uses 192.168.1.x. HA has a static IP ...

Share on different interface | TrueNAS Community

... SMB, etc). There are two relevant knobs: * bind IPs (list of IP addresses the service will bind to) -- global * hosts allow / deny - per share.

Basic IP Addressing and Troubleshooting Guide

IP addressing supports three different commercial address classes; Class A, Class B, and Class C. ... In a class B address, the first two octets are the ...

SMB Not Working (Sort of) After IP Address Changes - Unraid Forums

different unraid address (192.168.4.100). I appear to have a login problem ... SMB address (\\HUNTERNAS), I get windows cannot access \\HUNTERNAS.

Restricting Access to Samba Shares by IP - Arch Linux Forums

If specified in the [global] section then it will apply to all services, regardless of whether the individual service has a different setting.

Unable to browse to network shares on same subnet - Windows

I am more interested in your machine's IP addresses as your phone IP ... connection over SMB / CIFS from the workstation's original “problem IP”.