Events2Join

So how much boost can the stock engine handle. I know 400whp is ...


So how much boost can the stock engine handle. I know 400whp is ...

The motor can handle around 400 to 450 hp ish from stories I've heard. That could come from 18 PSI from a big turbo or 25 PSI from a smaller one ...

400WHP on stock Motor? Ticking Time Bomb?? - IW STi Forum

I wouldn't go 400whp..that block will not last very long especially some hard driving. Dchee RIP Chris Schoen-Kiewert of EFI Logics - 7.23.2012

How much Boost is safe on a stock engine. - Miata Turbo Forum

... power you have to get forged pistons and rods. Can a stock engine handle like 15 psi? If it can how well can it handle it. If you run 8 or 12

How much boost do I need for 400 RWHP? | Ford Mustang Forums

The rule of thumb is 10 hp per 1 psi of boost. You will need at least 10 lbs and a good inlet system to get you the 130 extra.

How much boost on stock internals? - NASIOC

A turbo of that size can EASILY make massive boost and hold it all the way to redline. Most people accept 400whp is about the limit of the stock ...

How much boost can the stock fa20 handle? - FT86club.com

You know that gasoline engine rated for XXX HP does not run at XXX HP always. If you boost the engine to XXX HP and do street driving only, it ...

How to Build a 400whp Focus ST - Edge Autosport

There are many stock engine ST's running around with 400whp for many thousands of miles. There are ST's that have also blown up within the first ...

how much boost can stock handle - S2KI Honda S2000 Forums

The pistons and cylinders are not designed for boost so 9 or 10 psi maximum. I broke a ring land on a piston with just a touch more boost.

Is Chasing 400whp On Stock Engine Worth It? - Fiesta ST Forum

Perfect turbo for our cars. A few thoughts. It's early so stick with me if I'm not making any sense. At 400whp I'd say it's more a ...

how much psi can the stock motor hold? - Toyota GR86, 86, FR-S ...

All of which were reported with either bad tunes, improper supporting mods or just waaaay to high of boost. On pump gas 10-11psi seems to be the ...

How much boost can a stock motor handle? - CorvetteForum

Sure 5-6psi is a good starting point. Safe is relative to your comfort level. 7psi will probly clear 500rwhp and 10psi about 600rwhp.

Is there a stock turbo capable of 400hp | MNSubaru

400whp is more 20G and up territory. Also goes without saying you need a lot of supporting mods to get there.

max boost on stock internals? - Infiniti G35 & G37 Forum Discussion

stock internals will hold that extra boost oh well any opinions? please post back thanks! ... just stay below 400whp and you'll be ok. I see more ...

How much power can the stock internals hold? - Subaru WRX Forum

sorry to change it up but th sr55 pushes out 500 hp at only around 15psi? thats insane, where can i learn more about it? Bubis 04' Aspen White ...

how much boost can a stock b16 handle - Honda Forum Discussion

Who knows, it depends on factors such as turbo size, and tuning. Boost is not the limiting factor of your engine, actual power being made and ...

How much boost can stock internal handle | Ford Focus RS Forum

I'd be afraid to push 400 whp on the stock block. NoRS. Save Share ... So initially the engine was 315 or so and still more than ...

stock engine max psi | NSX Prime

No more than 400RWHP depending on the condition of the engine. I have 371 with 7 psi of boost. Feel fairly comfortable.. Reply ...

How To Make 400 Horsepower RELIABLY On Your STI - YouTube

Reliable is the issue. I've got a built 400+ STI, downtuned to 22 psi, 45,000 miles on the built motor, no issues. Lasting fun factor.

boost max on stock engines - Bimmerforums.com

So the engine will make more or less hp at any given "boost" level depending on the turbo etc. A Huge factor is your octane level available in ...

STOCK ENGINE POWER LIMIT RECOMMENDATIONS

2.2: These need rods and pistons to make any sort of good power. Around 250 torque the stock rods will go. Stock internals aren't good for much, ...