Solution for rattling noise at very low RPMs

It certainly sounds like a bad throw out bearing in that case. While in there check the clutch pressure plate for any loose diaphragm springs ( ...

Most sounds that are described as "rattling at x rpm and heard easier outside of car" are coming from something on the chain of exhaust ...

Your lucky you can create the noise standing still. Try reverse. If no noise, the engine rocking backward in response to being in a forward gear ...

What had happened with my car was some how the pipes had some how worked them self's loose therefore they would vibrate and cause a horrible ...

sounds like maybe a loose bracket, or maybe metal to metal contact somewhere on/in the exhaust system. CHRISMAN2000's Avatar. CHRISMAN2000 12-09 ...

Engine shakes at low rpm under even a light load, which shakes the exhaust. Loose exhaust shield will be your culprit. I suggest checking the ...

One common problem that will cause a rattle at idle is a failing hydraulic valve lifter. The lifters are small parts that open and close the ...

If you hear a pinging or rattling sound when accelerating, low-octane fuel could be the cause. Pinging (also called pre-ignition or detonation) ...

Yeah anything loose or cracked can rattle. Since you can hear it in neutral, there are some ways to pin-point such noises. Get a helper.....if ...

First thing, look for loose objects in the cabin, glove box and boot (trunk). I have a low speed rattle in a car, but it comes from one of the ...

Shaking at low rpms means that tires out of balance, get your tires balanced and rotated. Have the cars suspension checked out, see if you don't ...

Solution for rattling noise at very low RPMs ... The problem was with a loose catalytic convertor heat shield. I cut a thin metal wedge and ...

I have got the same issue at low-medium speed and low rpm on acceleration. Sounds more like a metallic rattle seems to be originating probably ...

Most likely your sound is either from something being loose on or around the exhaust system, or is from the CAI hitting the fender. Take a look ...

could be the exhaust hitting something, or a heat shield hitting something while vibrating. biff44's Avatar. biff44 04-30-24 07: ...

Could be loose reinforcement plate on bottom, or the metal MAF clip rattling around. Did you loosen any of the heat shielding or motor mount ...

I did a valve adjustment the other day, found that every single intake valve was loose, .010-.011 which is quite the gap. Brought all the valves ...

Yes this is “bogging” the engine. The gear you're in is not matching the speed you're going. This isn't something to necessarily worry about.

I highly suggest putting the car on ramps and with it in park slowly press on the gas & extremely slowly back off the gas to find the exact RPMs ...

If it was an internal engine issues, why would replacing the TCT fix it? And furthermore, the sound *does* disappear instantly at 2,500 RPM. I ...