Why would I want a 2.5Gbps WAN port but only 1Gbps LAN ports?

It seems routers with 2.5Gbps LAN are $$$. I've seen several routers that have 2.5Gbps internet ports but only 1Gbps LAN ports. Why would you do that?

What's the point of 2.5Gig WAN with only 1 Gig LAN - TP Link

The 2.5Gbps is shared amongst multiple devices, both WAN and WiFi. So while a single LAN device may only be able to do 1Gbps there'll still be bandwidth ...

2.5g LAN port stuck at 1g? - SNBForums

The router's LAN ports are only 1GbE so to achieve more than gigabit download speeds you would have to test two or more client devices ...

I have 3gbps fiber internet. But there is only one 2.5gbps port on my ...

Almost any WiFi 5 consumer router can easily handle a gigabit of throughput. The key is to make sure the router has gigabit Ethernet ports. A ...

Only 1 Gbps Networking speed on an advertised 2.5 ... - TechPowerUp

So unless you're paying for more than gigabit internet (which would be absurdly expensive even in the few countries that offer Gigabit), your ...

2.5G vs 1G port on router - RedFlagDeals.com Forums

Routers that support a 2.5gbps connection pretty much always come with a 2.5gbps WAN port and they leave the LAN ports as gigabit. Sometimes if ...

What is the difference between 1G and 2.5G Ethernet?

To reach 1G Ethernet speed, you need a cable modem or cable modem router that has a Gigabit port and a Cat 5 Ethernet cord. What is a Cat 5 cord? A category 5 ( ...

Is my Internet/WAN input 2.5Gbps or 1Gbps - TP-Link Community

The Tp-link Wifi router then takes that cat 8 LAN cable into the 2.5 Gbps port correctly. ... and not only work at 10Gbps or 1 Gbps speed like you ...

Introduction of Multi-Gigabit Ethernet Ports and User Scenarios etc.

A multi-gigabit Ethernet port takes network speeds to the next level. It supports data transfer speeds of 2.5Gbps, 5Gbps, and even 10Gbps.

What is 2.5G multi-Gig port? - Hitron Americas

For example, if a 2.5G multi-Gig Ethernet port is connected to a router that only has a 1 Gbps Ethernet port, your router will only transfer 1 Gbps speeds to ...

Brume 2 GL-MT2500 use 1Gbps as WAN, 2.5Gbps as Lan

I want to switch the port around. 1Gbps port as WAN and 2.5Gbps. my ... were recommended to swap the LAN and WAN ports. It should work ...

2.5/5Gbps WAN (and/or LAN) ports on newer Fireboxes ...

... would need a device that has at least a 2.5Gbps WAN port (or 5Gbps, as some 5Gbps ports also negotiate 2.5Gbps - but most 10Gbps ports won't).

How best to take advantage of 2 Gb internet connect w/ RT6600ax ...

As wrote above. Only in that scenario. You “could” have advantage when having a 2 (2.5 Gb) LAN port as well. (And NO limitations are used by a ...

Dream Machine Special Edition / WAN 2.5 GBps as LAN

Not sure to get it correctly. the 8x1G and the 1x SFP+ 10G LAN ports are a single switch (or am i wrong ?), so having an additional 2.5 Gbps ethernet can be ...

Everything you should know about 2.5 Gigabit Ethernet (2.5GbE)

2.5GbE supports 10Mbps, 100Mbps, 1Gbps, and 2.5Gbps. Upgrading from 1GbE to 2.5GbE means the network speed is improved, which is 2.5 times ...

2.5GB daisy chaining 1GB switch would it work? - Ars Technica

WAN = Wide Area Network = cable modem/external network, not your LAN so you don't want that! A few recent 10 Gb switches and SFP+ modules also ...

2Gbps slow speeds | Cox Community

Another good option outside of Asus, is the TP-Link Tri-Band BE9300. Wifi 7 with the 6Ghz band, 1 2.5Gbps WAN port and 4 2.5Gbps LAN ports at 220$ is a steal.

Question - Which Modem/Router? - Tom's Hardware Forum

modem/router they provide only has one 2.5gbps wan port, one 2.5gbps Lan port and three 1gbps Lan ports. Currently I have 4 direct ...

Broadband Speed Upgrade | TechRepublic

... only has 1 2.5gbps wan port, 1 2.5gbps lan port and 3 1gbps lan ports. Currently I have 4 direct connections to the current virgin hub as these ...

Questions on Routers - Switches - Alta Labs

Would you like to see the WAN, LAN or WAN/LAN ports on the router 2.5Gbps? Or higher? If possible 2.5gb and/or 10gb for UTP/WAN (10gb should be ...