Would you trust a Harbor Freight torque wrench?

Would you trust a Harbor Freight torque wrench? - RME4x4.com

The HF brand did better at retaining adjustment and was slightly more accurate. This was over a wide range of tests.

HF torque wrenches worth it? : r/harborfreight - Reddit

From my experience the cheap ones are fine and will last awhile doing occasional work with them IF they are kept in their plastic blow-mold ...

Harbor Freight Torque wrench Tested | BobIsTheOilGuy

In my experience the HF torque wrenches are extremely good, surprisingly. I bought two wrenches, the 1/2" and 3/8", because they were dirt cheap ...

Harbor freight 1/2" torque wrench | The Garage Journal

Most torque wrenches are accurate from 20% up to 100% of scale. The 150 ft lb CDI should be just as accurate as the 250 one at 100 ft lbs, but ...

Harbor Freight torque wrench 8-year review and accuracy test

UPDATE - check out my comparison review between this torque wrench and a Tekton torque wrench: https://youtu.be/5GoiVq4Uitc Here I review ...

$10 Harbor Freight Torque Wrench | BobIsTheOilGuy

I have all 3 sizes and they are consistent, very close to my old Craftsman, and overall a great value. My only complaint is that the click is not very loud for ...

Harbor Freight Torque wrench quality? - The Firing Line Forums

They are not Mac tools but I've had them for about 4-5 years now and they have been reliable. I do take care of them. I have had trouble with HF ...

Is a Harbor Freight Torque Wrench Really Bad?

I did. I bought a HF 1/2" and 3/8" set of click torque wrenches from them 6 years ago. They both are accurate as compared with my Craftsman beam ...

Harbor Freight 1/2" and 3/8" Drive Review and Test - YouTube

I just got it for $13 and it does the job. Im a weekend diy guy and can't see myself spending $100 for a torque wrench.

Testing torque: Harbor Freight vs Snap-On - Hagerty Media

The results show the more affordable ICON wrench was more accurate across the range for 50-250 foot-pounds of torque. That could be luck though, ...

Harbor freight click type torque wrenches - ThumperTalk

I would trust them enough for lug nuts tension. I don't trust them for the fork clamps or engine components.

Pittsburg Torque Wrench, Accurate For $20? - YouTube

Buuuut, if you've proven it's accurate why wouldn't you use it on an engine? Accurate is accurate. Especially if you have a tester avail.

Why You Should Never Trust a Cheap Torque Wrench - YouTube

I get myself into a lot of bad DIY situations. This is the story of me overextending my DIY abilities and making a big mistake with a repair ...

Harbor Freight Torque wrench quality? [Archive]

As far as Harbor Freight tools, they are not great, but they work pretty well most of the time. And if they don't, there's always the 90-day ...

Would you trust a Harbor Freight torque wrench for building an ...

HF torque wrench will eventually break and you'll have to replace, HF is decent tools but they are throw away tools. If you can wait, wait until ...

Would/ do you trust Harbor Freight torque wrench's? - ThumperTalk

I tested it at 20, 100, and 180 in-lbs. In each case, and under repeated tests, the wrench is within the reported accuracy of +/- 4%. Seriously, ...

Would you trust Harbor Freight torque wrenches? - AR15.com

HF Torque wrench's get pretty high marks every single time they are compared to the higher dollar ones, I have 3 of them and a couple of Snap ...

Experience with Harbor Freight torque wrench - LS1TECH

I said well I'm only going to use this torque wrench for a month and probably be done with it for a couple of years. so I did some research on ...

My Experience Buying a Torque Wrench from Harbor Freight

Overall the reviews were overwhelmingly positive, with most users commenting on the surprising quality and accuracy for the price. Many reviews ...

PITTSBURGH 1/2 in. Drive 10-150 ft. lb. Click Torque Wrench

It is very easy to use and of good quality. Definitely happy I added this to my tool box! ... love it! This is my 4th one! love it and comes with case! harbor ...