OEM Suspension Settings

Setting the OEM suspension…. - Yamaha Tenere 700 Forum

Good morning. I came across this video ( ). I was wondering if anyone of a similar weight and luggage situation had dialed in the optimal ...

Setting Up Factory Suspension - Can-Am Maverick Forum

Start with these settings,,,, tweak from there as needed for weight/riding style. I think the 2020's are supposed to come set from the factory at the below ...

Run the forks compression towards full stiff and the rebound towards full soft/fast to keep the front rebounding/popping back up as quick as the rear.

what suspension settings do you have on your 2019+

first get your ride height correct (14" ground clearance if stock tires), then set your crossover rings so 1/2" before than coil bind, then you ...

Stock suspension settings - the Pelican Parts Forum!

Book settings recommended at hard minus 6 clicks on the front; a couple of turns from soft on the rear preload, and 1/2 turn from hard on the rear rebound.

Factory suspension settings. - CBR Forum

Stock spring setting on the rear shock is position 2 for stock, 1 for softer preload, 3-7 are for hard preload.

Just stock suspension settings - Suspension Set-up and Mods - Z900

I'd like to get a list of rider weights and settings for the stock suspension for quick reference. If you've mentioned your setup in another post, I apologize.

What are stock suspension settings for a 2009 yzf-r6?

start at halfway clicks out of both lo speed compression and rebound, preload should be set as per your sag. if you don't like the way it's ...

Stock suspension adjustment for rider weight | YFZ Central

The best setting for 130 pound person is all the way out counter clockwise then turn it clockwise until you hear 5 clicks. DO THIS FOR THE OTHER ...

Stock Suspension Settings? | Polaris RZR Forum

Mounts? ... The rears need the spring collars twisted up. To lower the rear, on a stock empty XP, plan on about 7 inches of thread above. And run ...

How to revert to stock suspension settings - Tech Help/Race Shop

Often the suspension shop who performed the work will have a decal on the fork & shock to state their standard recommend settings. Example: fork ...

Share your Street RS suspension settings - Triumph Rat

Would prefer to have closer to 40mm front and 30mm rear, but it's not possible with the stock springs for my weight. As a result, I have the ...

Stock suspension owner's manual settings?

I have mine set up with the comfort rebound and compression but a different preload in the front and I find it way better. Our roads are some ...

Suspension - Factory Settings | Honda Transalp Forum

At 90kg in full riding gear I have found it necessary to ramp up the preload to the maximum. That is the only adjustment available.

Thread: factory suspension settings - ApriliaForum

The biggest effect on handling = suspension set-up. Don't throw all that money away before taking it to a suspension tuner. You have the goods on it.

oem suspension settings - www.YamahaR.co.uk

Re: oem suspension settings · 1 click more rebound · 2 turns extra high speed compression · 3 clicks less low speed compression

Honda Africa Twin - Factory Suspension Setup - YouTube

Michael shows you how to completely restore this Africa Twin's suspension back to factory settings. The owner purchased this 2017 CRF1000L ...

2015 DRZ400S STOCK Suspension Settings - ThumperTalk

My 2018 drz400s owners manual calls for fork compression at 13 clicks out, rebound at 16 clicks out. Shock at 1 1/4 turns out for high speed ...

Stock Suspension Settings | RiderForums.com

should be set at straight up and down (the wee dial on the right hand fork tube) the rear should be 3/4 of a turn from full in for a 160lb rider ...

Suspension setup static/rider sag | Kawasaki ZX-10R Forum

What numbers are you getting/aiming for with stock suspension for spirited street/track? I'll kick off: Front 13.79 mm (0.94 inches) at 1.75 ...